Best current price£16.50from B&Q
Shopping.co.uk recommended and popular offers
B&Q£16.50Visit shop - Refined Danish Oil 500Ml Clear Wood Stain And SealantNatural Satin Finish For Interior And Exterior Timber
Visit shop1 offer from £16.50
View price history by clicking the chart icon.
The Colron Finishes Danish Oil (500ml) is designed for homeowners and DIY enthusiasts looking to enhance and protect interior and exterior wood surfaces. Its key benefit is providing a tough, durable, and waterproof finish that enriches natural wood grain. A potential caveat is the need for proper surface preparation and the drying time between coats.
| Model Part Number | 43SDA |
|---|---|
| Brand | Colron |
Drying time can vary depending on wood type, temperature, and humidity. Generally, allow 4-6 hours for drying between coats, and ensure the final coat is fully cured before putting the item into use, which may take 24-48 hours.
No, Danish oil is designed to penetrate natural wood. It should not be applied over existing paint or varnish. The surface must be bare wood.
Light sanding with very fine-grit sandpaper (e.g., 320-400 grit) between coats is optional but can help achieve a smoother finish by removing any raised grain.
Tools used for application, such as cloths, should be laid flat to dry outdoors or soaked in water to prevent spontaneous combustion, as oil-soaked rags can be a fire hazard.
The oil is designed to enhance the wood's natural colour and grain, giving it a slightly richer, deeper tone with a low sheen. It does not typically add a strong colour tint.
While it provides a waterproof finish, it's recommended to use food-safe oils specifically designed for direct food contact on cutting boards. This product is intended for general furniture and woodwork protection.
This can happen if excess oil was not fully wiped off or if the application was uneven. Ensure all excess is removed. For severe patchiness, you may need to lightly sand and reapply, paying close attention to even coverage and wiping off excess.
This indicates the oil has not fully cured, likely due to insufficient wiping of excess oil. Allow more drying time in a well-ventilated area. If it persists, you may need to wipe the surface down with a cloth lightly dampened with mineral spirits and allow it to dry completely before reapplying a thin, well-wiped coat.
Ensure the wood surface is properly prepared and porous. If the wood has a very dense grain or an existing sealant, penetration might be limited. Clean the surface thoroughly and consider a very light sanding to open up the grain.
Setup: Ensure the wood surface is clean, dry, and free from dust, grease, or old finishes. Lightly sand the surface if necessary, and wipe away any dust. Shake the tin of Danish oil thoroughly before use.
Application: Apply a liberal amount of oil evenly using a clean, lint-free cloth. Allow the oil to penetrate the wood for 15-30 minutes (depending on wood type and temperature). Wipe off any excess oil with a clean cloth. For a more robust finish, apply a second coat after the first has dried, following the same procedure. Allow the final coat to dry completely before use.
Compatibility: This Danish oil is suitable for all types of interior and exterior wood. It is ideal for furniture, worktops, doors, trim, and general woodwork.
Care: To maintain the finish, clean surfaces with a damp cloth. Periodically reapply a thin coat of Danish oil as needed to refresh the protection and appearance.
