SPARES2GO Metal Blade Compatible With Challenge MEB1435B Lawnmower - 35cm

The blade is made from durable, rust and weather-resistant steel.

The blade length is 35cm / 355mm, width is 6.3cm / 63mm, and the blade hole diameter is 2.3cm / 23mm.

The curved blade ends are designed for efficient grass collection and improved mulching, which returns nutrients to the soil.

This blade is specifically compatible with Challenge MEB1435B lawnmowers. Always verify compatibility with your specific model before purchase.

It's recommended to inspect the blade regularly. Replace it if it shows signs of damage, significant dulling, or wear. For general use, replacement might be needed annually or bi-annually depending on mowing conditions.

Yes, this metal blade can be sharpened using appropriate tools and techniques. However, ensure it remains balanced after sharpening for safe operation.

The black finish is a coating that adds to the blade's resistance against rust and weather, contributing to its overall durability.

Ensure the blade is correctly seated and all bolts are tightened to the specified torque. Check if the blade is balanced; an unbalanced blade can cause excessive vibration. If vibration persists, the blade may be damaged or not correctly installed.

Verify the blade is installed with the sharpened edges facing the correct direction. Check for any obstructions or damage on the blade. Ensure the blade is securely fastened and not loose.

Ensure the blade's curved ends are oriented correctly. Check for blockages in the mower deck or discharge chute that may impede airflow and mulching. Keep grass at an appropriate height for mulching (typically no more than one-third of the blade length).

Inspect the blade for nicks, bends, or excessive dulling. If damaged, it should be replaced immediately for safety and performance. Sharpen the blade if it is dull but otherwise undamaged.