Tile Rite Big Spin Hurricane Tile Levelling Spacer Bases - 2mm Grout Joint, 3-15mm Tiles, Pack of 250

The system is designed to ensure that adjacent tiles are laid at the same height, preventing 'lippage' and creating a perfectly flat surface. It also helps maintain a consistent grout line width.

Yes, the Tile Rite Big Spin Hurricane Levelling Spacer Bases are part of a two-part system. The caps, which secure the tiles, must be purchased separately.

The standard height bases in this pack are suitable for tiles ranging from 3mm to 15mm in thickness.

These bases are typically designed for single use. Once the adhesive has cured and the stem is broken off, the base is removed and discarded.

This specific pack of bases is designed to create a uniform 2mm grout joint between tiles.

They are particularly effective for large format porcelain, marble, and stone tiles, where achieving a lippage-free finish is critical.

Tile Rite offers a 'deep base' version of the Big Spin Hurricane Levelling System that is designed for tiles ranging from 15mm to 25mm in thickness.

Ensure the Big Spin Hurricane cap is properly aligned and twisted firmly onto the base stem. Check that the cap is not damaged.

Verify that the bases were correctly positioned and that the adhesive provided adequate support. Ensure the stem was snapped off cleanly.

Wait until the adhesive is fully cured. Use a rubber mallet or pliers designed for breaking levelling system stems for a clean break.

Confirm that the tile thickness is within the 3mm-15mm range for this standard base. If tiles are thicker, the 'deep base' version is required.