Miniware TS101 Soldering Iron - I Tip - Blue
Best current price£58.30from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£58.30Visit shop - Miniware Ts101 Soldering Iron I Tip Blue
Visit shopB&Q£58.30Visit shop One Offer
1 offer from £58.30
View price history by clicking the chart icon.
Product Information
Full details
The Miniware TS101 Smart Soldering Iron is designed for electronics hobbyists and professionals seeking a portable and powerful soldering solution. Its key benefit is the enhanced control and versatility with dual power input options and an improved display. A potential caveat is the learning curve associated with its detailed menu settings for advanced users.
All features
| Model Part Number | MNWTS101I-SI-BU |
|---|---|
| Brand | ProRock |
Extended Product Information
FAQs
What is the maximum power input for the TS101?
The TS101 supports up to 65W via DC5525 (9-24V). Via USB-C PD, it supports up to 45W. With PD3.1 firmware updates, it can support up to 90W (9-28V).
Can I use my old TS100 soldering tips with the TS101?
Yes, the Miniware TS101 is designed to be fully compatible with all TS100 soldering iron tips.
How do I adjust the temperature?
Use the 'A' and 'B' buttons to navigate the menu. Select the temperature setting and use the same buttons to increase or decrease the desired temperature between 50℃ and 400℃.
What does the 'Boost' function do?
The 'Boost' function temporarily increases the tip temperature rapidly for challenging soldering tasks, such as joining thick wires or large ground planes. It is typically activated by a specific button combination.
Does the TS101 come with a power supply?
No, the TS101 requires a separate power supply (either a DC5525 adapter or a USB-C PD adapter) which is not included with the unit.
How do I perform a firmware update?
Firmware updates are typically performed by connecting the TS101 to a computer via its USB-C port and using specific software provided by Miniware. Refer to the official Miniware website for the latest firmware and instructions.
What is the temperature stability of the TS101?
The TS101 has a temperature stability of ±2%.
Troubleshooting
Soldering iron not heating up
Ensure the power source is properly connected and providing sufficient voltage/wattage. Check that the soldering tip is securely seated. Verify that the temperature setting is above ambient.
Temperature fluctuates significantly
Ensure a stable power source is used. Check for any damage to the soldering tip or internal connections. Calibrate the temperature if the issue persists (refer to manual for calibration steps).
OLED screen is blank or unreadable
Check the power connection. Try a different power source. If the issue persists, contact support for potential hardware failure.
Tip replacement is difficult
Ensure the iron is completely cool. Loosen the collar screw. If the tip is stuck, gently wiggle it while applying slight pressure.
Pros and Cons
Pros
- Highly portable and compact design
- Versatile power input options (DC and USB-C PD)
- Precise temperature control with a wide range
- Faster heating with the 'Boost' function
- Compatible with existing TS100 tips
- Clear and informative OLED display
Cons
- Higher power settings may require a robust power source
- Menu settings can be complex for beginners
- The anti-slip cap is a small accessory that can be misplaced
- Requires a separate power supply (not included)
- Maximum ambient operating temperature is limited to 40°C
Setup, Compatibility & Care
Setup: To set up the TS101, first ensure you have a compatible power source. Connect your DC power supply to the DC5525 port or a USB-C PD power adapter to the USB-C port. The device will power on automatically. Use the A-B buttons to navigate the menu and adjust the target temperature. The soldering tip is pre-installed, but if you need to replace it, simply unscrew the collar, remove the old tip, insert the new one, and retighten the collar.
Compatibility: The TS101 is compatible with all TS100 soldering iron tips. For power input, it supports DC 9-24V (up to 65W) via the DC5525 jack and PD3.0/PD3.1 (9-20V up to 45W, or 9-28V up to 90W with updated firmware) via the USB-C port. Ensure your power adapter meets these specifications.
Care: To maintain the TS101, always allow the unit to cool down before storing. Clean the soldering tip regularly with a damp sponge or brass wool to remove oxidation and flux residue. Periodically check the tip for wear and replace it as needed. Avoid exposing the unit to excessive moisture or extreme temperatures. The exterior can be wiped clean with a dry or slightly damp cloth. Firmware updates can be performed via the USB-C port.