D-Line White Semi-Circle Decorative Trunking - (H)8mm, Pack Of 4

Best current price£17.85from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£17.85Visit shop B&Q - White Semi-Circle Decorative Trunking (H)8mmPack Of 4
Visit shop
Best current price£17.85from B&Q
Shopping.co.uk recommended and popular offers
B&Q£17.85Visit shop B&Q - White Semi-Circle Decorative Trunking (H)8mmPack Of 4
Visit shop1 offer from £17.85
View price history by clicking the chart icon.
This D-Line White Semi-Circle Decorative Trunking is ideal for homeowners and installers looking to discreetly hide single, low-profile cables like speaker, bell, or telephone wires. Its key benefit is a neat, unobtrusive finish that blends with decor, though its small size limits it to thinner cables. This pack contains four 16mm (W) x 8mm (H) trunking pieces, designed for easy installation and a clean aesthetic.
| Brand | D-Line |
|---|
This trunking is designed for single, low-profile cables such as speaker wire, bell wire, telephone cable, and alarm cable.
Yes, the white finish is paintable. Ensure you use a paint suitable for plastic surfaces for best results.
It features a self-adhesive backing for easy peel-and-stick installation on clean, smooth surfaces.
The trunking measures 16mm (width) x 8mm (height).
No, this trunking is not designed for mains power cables due to its small size and intended use for low-voltage wiring.
Each pack contains four pieces of trunking.
Ensure the surface is thoroughly cleaned and dried before application. Press firmly along the entire length for at least 30 seconds. For persistent issues, consider using a suitable adhesive tape or mastic compatible with both the surface and the trunking material.
Measure and cut pieces as accurately as possible. Ensure ends are cut cleanly. If a slight gap remains, it may be filled with a small amount of paintable filler after installation.
Use a sharp, fine-toothed saw or a specialized plastic cutting tool. Make slow, controlled cuts. Lightly sand any rough edges after cutting.
Setup: Ensure the surface where the trunking will be applied is clean, dry, and free from dust or grease. Measure the required length and cut the trunking pieces to size using a fine-toothed saw or appropriate cutting tool. Peel off the protective backing from the adhesive strip and firmly press the trunking into place. For longer runs or heavier cables, consider using additional adhesive or screws (if appropriate for the surface and trunking).
Compatibility: This trunking is designed for single, thin cables such as bell wire, speaker wire, telephone cable, and alarm cable. It is not suitable for mains power cables or multiple data cables. It adheres best to smooth, flat surfaces like painted walls, finished wood, or tile.
Care: To clean, use a soft, damp cloth. Avoid abrasive cleaners or solvents, which can damage the finish. If painted, use standard household paints suitable for plastic surfaces.