Best current price£49.73from eBay
Shopping.co.uk recommended and popular offers
eBay£49.73Visit shop COB LED Cabinet Strip Lights 6-in-1 Dimmable Touch Control Warm White 1m
Visit shop1 offer from £49.73
View price history by clicking the chart icon.
1 offer from £25.00
View price history by clicking the chart icon.
The Tlinkosta Cabinet Light 6-in-1 system is designed for homeowners and DIY enthusiasts looking for versatile, low-profile lighting solutions for wardrobes, kitchen cabinets, and drawers. These COB LED strips offer the significant benefit of high-quality, high-CRI warm white light combined with a unique penetration-sensing touch control that works through non-metallic surfaces for a seamless look; however, users should note that the strips require careful planning for cutting and wiring if they intend to use segments shorter than the pre-configured modules.
| Model Part Number | 6-in-1 |
|---|---|
| Brand | tlinkosta |
You can cut the COB strips every 5cm along the designated cutting marks provided on the strip.
The sensor works best through non-metallic, thin materials such as wood, plastic, or glass cabinet doors.
Yes, the integrated smart memory function will retain your brightness level even after the light is turned off.
Yes, their slim profile and high CRI output make them an excellent choice for illuminating countertops.
While durable, these strips are designed for indoor cabinetry and should be kept away from direct water exposure or extreme steam.
Ensure the surface material is non-metallic and within the effective range of the sensor; try tapping a different spot on the surface.
Clean the surface again with alcohol and ensure it is fully dry before reapplying; if necessary, use double-sided mounting tape as a reinforcement.
Verify that your power supply is providing consistent voltage and check all cable connections for secure contact.
To install, first clean the mounting surface thoroughly with isopropyl alcohol to ensure the nano adhesive bonds effectively. Plan your layout before peeling the backing, specifically identifying where you need to cut the strips at the designated 5cm marks. If you are using the penetration sensing feature, ensure the material thickness does not exceed recommended limits for signal sensitivity. For maintenance, avoid using harsh chemical cleaners on the light strips; a dry or slightly damp microfiber cloth is sufficient to remove dust. If you need to relocate the lights, use a hair dryer on low heat to gently soften the adhesive before carefully peeling it away from the surface.
