Make a splash with Rust-Oleum Bathroom Wall & Ceiling Paint! The water-resistant Bathroom Paint is...Make a splash with Rust-Oleum Bathroom Wall & Ceiling Paint! The water-resistant Bathroom Paint is designed to be used on bathroom walls and ceilings to withstand moisture and high levels of condensation and leaves a beautiful modern, matt finish. The premium paint formula is water-based, virtually odourless and available in 100+ stunning colours to match any bathroom colour scheme. Easily applied by brush or roller to bare plaster, brick or concrete walls and directly over previously painted walls. Rust-Oleum Bathroom Wall Paint resists cracking, peeling & blistering for up to 6 years before first maintenance when applied according to label instructions. Water-resistant paint, however, not suitable for shower enclosures or areas in constant contact with water Water-based paint and virtually odourless, apply to new or previously painted plaster, brick or concrete walls and ceilings Scrubbable bathroom paint for easy cleaning (Tested to ISO 11998 Class 1 Wet Scrub Rated) Coverage: 12m2 per litre. For best results apply two coats, available in 100+ colours to match any bathroom colour scheme and comes in a 2.5L tin Need the right tools for the job? Get the Large Ready to Roll Kit for half price when you buy any 2.5L tin of paint*. The kit contains everything you need for larger projects, including a roller, cardboard roller tray, bamboo handled brush, masking tape and sanding block. TRY AT HOME WITH OUR HANDY 99P TESTER SACHETS Containing 10ml of the actual paint, our tester sachets help you choose the perfect colour easily. It might look small but each sachet is enough to give you a 30cm by 30cm test area and a true representation of colour and adhesion at home.
This guide is for anyone looking to refresh their bathroom with a durable, water-resistant paint. Rust-Oleum Bathroom Wall & Ceiling Paint provides a beautiful, modern, matt finish and is designed to withstand moisture and condensation, making it ideal for bathrooms. However, it's important to note that this paint isn't suitable for shower enclosures or areas in constant contact with water. This guide will help you understand the key features, benefits, and how to properly apply and care for this paint.
All features
Colour
Brown
Brand
Rust-Oleum
Extended Product Information
FAQs
How much area does a 2.5L tin cover?
A 2.5L tin covers approximately 30 square meters, depending on the surface and application method.
Can I use this paint in a shower enclosure?
No, this paint is not suitable for shower enclosures or areas in constant contact with water.
Do I need to prime the surface before painting?
Priming is generally not required if you are painting over a previously painted surface in good condition. However, priming is recommended for bare plaster, brick, or concrete walls.
How long does the paint take to dry?
Allow at least 2-4 hours of drying time between coats and 24 hours for the paint to fully cure. Drying times may vary based on environmental conditions.
How many coats of paint should I apply?
For best results, apply two coats of Rust-Oleum Bathroom Wall & Ceiling Paint.
How do I clean the painted surface?
The paint is scrubbable. You can clean it using a damp cloth and mild soap. Avoid abrasive cleaners.
Is this paint suitable for ceilings?
Yes, this paint is specifically designed for both bathroom walls and ceilings.
Where can I buy Rust-Oleum Bathroom Wall & Ceiling Paint?
This paint is available at various home improvement stores and online retailers.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is properly prepared, clean, and free of grease. Lightly sand glossy surfaces. Apply a primer if necessary.
Paint finish is uneven.
Ensure even coat application, avoiding excessive paint build-up. Use a roller for larger surfaces and overlap strokes.
Paint is peeling or blistering.
Ensure the surface is completely dry before painting. Avoid applying paint too thickly. Check for any moisture issues and address them before repainting.
Pros and Cons
Pros
Water-resistant formula ideal for bathrooms.
Available in a wide range of colors.
Easy to apply with brush or roller.
Provides a modern matt finish.
Scrubbable for easy cleaning.
Low odor formula.
Cons
Not suitable for shower enclosures or areas with constant water contact.
Requires two coats for best results.
Coverage is 12m2 per litre, which may require multiple tins for larger bathrooms.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, dirt, or grease. Lightly sand glossy surfaces to improve adhesion.
Application: Stir the paint thoroughly before use. Apply two coats of paint using a brush or roller. Allow the first coat to dry completely before applying the second coat. A roller is recommended for larger areas for a more even finish.
Drying Time: Allow at least 2-4 hours of drying time between coats, and at least 24 hours for the paint to fully cure. This can vary based on temperature and humidity.
Cleaning: Clean up spills immediately with soap and water. Clean brushes and rollers immediately after use.
Compatibility: Suitable for use on plaster, brick, concrete walls and previously painted surfaces. Not suitable for areas with constant water contact such as inside of shower enclosures.