Natural Pine Angled Edge Moulding - (L)2400mm (W)13mm (T)13mm - Beige

You will need a saw (hand saw or miter saw), measuring tape, pencil, wood glue, nails or a nail gun, hammer or nail gun, sandpaper, wood filler (optional), and finishing supplies (paint, stain, varnish).

Yes, this moulding is paintable. You may need to prime it first for best results.

Use a saw to cut the moulding to the required lengths. A miter saw will provide the most accurate cuts.

Use wood glue designed for woodworking projects.

Use wood filler to fill the nail holes. Let it dry completely and then sand it smooth.

While the moulding is made from natural pine, it's generally best suited for indoor use. If you must use it outdoors, ensure the wood is properly treated with a suitable exterior sealant or paint.

Double-check your measurements and ensure the cuts are precise. Adjust the moulding as needed, or recut it if necessary.

Pre-drill pilot holes before nailing to prevent the wood from splitting. Use a suitable nail size.

Ensure the moulding surface is clean and properly sanded before applying any finish. Apply multiple thin coats, allowing each coat to dry completely.