Evo-Stik Floor Tile Adhesive - Grey
Best current price£39.31from HSS Hire
Best offers
Shopping.co.uk recommended and popular offers
HSS Hire£39.31Visit shop Evostik Green Evo-Stick Flr Tile Adh Fst Set For Concrete 2Hr Set
Visit shopHSS Hire£39.31Visit shop One Offer
1 offer from £39.31
View price history by clicking the chart icon.
HSS HireEvostik Green Evo-Stick Flr Tile Adh Fst Set For Concrete 2Hr Set
Free delivery in 1–3 days
£39.31
Visit shop
Product Information
Full details
The Evo-Stik Grey Floor Tile Adhesive is for DIY enthusiasts and professionals looking for a reliable, fast-setting bonding solution for ceramic tiles on concrete floors. Its key benefit is rapid adhesion, allowing for tile movement within two hours, significantly speeding up projects. A potential caveat is its specific suitability for concrete floors and interior use unless exterior conditions are specifically protected.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 5010591478497 |
| Brand | Evo-Stik |
Extended Product Information
FAQs
Can I use this adhesive on existing tiles?
This adhesive is specifically designed for concrete floors. Using it on existing tiles may require special primers or surface preparation not covered by standard instructions. It's best suited for new concrete installations.
How long do I need to wait before walking on the tiles?
You can typically walk on the tiles after approximately 2 hours, allowing for tile movement. For grouting, wait until the adhesive has set sufficiently, usually within the same 2-hour timeframe before you can proceed with grouting.
Is this adhesive suitable for shower floors?
Yes, the adhesive is waterproof and suitable for wet areas like shower floors, provided the concrete subfloor is properly prepared and the grout lines are fully sealed after tiling.
Can I use this outdoors?
Yes, this adhesive is suitable for both interior and exterior use and has excellent waterproof and frost-resistant qualities, making it ideal for exterior concrete floors.
What is the shelf life of the mixed adhesive?
The pot life for the mixed adhesive is typically around 30-60 minutes, depending on ambient temperature and humidity. Only mix what you can use within this timeframe.
How should I store the unused product?
Store the unopened bag in a cool, dry place. Once opened, keep the bag tightly sealed to prevent moisture ingress. Unmixed powder has a shelf life of several months if stored correctly.
What trowel size should I use?
The trowel size depends on the tile size and whether you are using a thin or thick bed application. Consult the product packaging or a tiling guide for specific recommendations based on your tile dimensions.
Troubleshooting
Adhesive is too thick or too thin
Adjust the amount of water added during mixing. Add a small amount of water if too thick, or a small amount of powder if too thin, mixing thoroughly until the desired consistency is reached.
Tiles are not adhering well
Ensure the concrete subfloor was properly prepared (clean, dry, and free of contaminants). Check that the adhesive was mixed correctly and applied evenly with a suitable trowel. Verify the correct type of tile is being used with this adhesive.
Adhesive is setting too quickly
Work in smaller sections to avoid the adhesive drying out on the subfloor before tiles can be laid. Ensure you are mixing only what can be used within the working pot life.
Water marks appearing on finished tiles
Ensure the adhesive is fully cured and the area is well-ventilated. For wet areas, confirm proper sealing of grout lines and consider if excessive water was used during application or cleaning.
Pros and Cons
Pros
- Sets quickly, allowing for grout and traffic in just 2 hours.
- High bond strength ensures long-lasting adhesion.
- Waterproof and frost-resistant properties add durability.
- Suitable for both thin and thick bed applications.
- Designed for easy application on concrete floors.
Cons
- Primarily designed for concrete floors; may not be suitable for other subfloors without proper preparation.
- Requires interior or protected exterior use to maintain performance.
- Grey color may show through lighter colored grout if applied too thickly in joints.
Setup, Compatibility & Care
Setup: Ensure the concrete subfloor is clean, dry, and free from dust, grease, and loose particles. Mix the adhesive according to the manufacturer's instructions, typically adding water to the powder until a smooth, lump-free paste is achieved. Apply the adhesive to the subfloor using a suitable notched trowel, creating an even bed.
Compatibility: This adhesive is specifically designed for use with ceramic tiles on concrete floors. It is suitable for both interior and exterior applications. For exterior use, ensure the concrete is adequately prepared and the tiled area has proper drainage. It is not recommended for use on wooden, metal, or existing tiled surfaces without appropriate priming or preparation.
Care: Once the tiles are set, the adhesive requires minimal care. Ensure grout lines are properly sealed, especially in wet areas. Clean any spills or excess adhesive immediately with water before it dries. Cured adhesive is generally easy to clean with standard household cleaning agents.