Old Blood Noise Endeavors Sunlight Stereo Modulated Reverb Effects Pedal - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for guitarists and synth players seeking unique sonic textures. The Old Blood Noise Endeavors Sunlight pedal offers post-reverb modulation with stereo capabilities and MIDI control, providing expansive and dynamic soundscapes. A potential caveat is its complexity, requiring some learning to master its full potential.
All features
| Colour | Black |
|---|---|
| Model Part Number | OBN-SUNLSBL |
| Brand | Old Blood Noise Endeavors |
Extended Product Information
FAQs
What is 'post-reverb modulation'?
Post-reverb modulation means that the modulation effects (like chorus, vibrato, or tremolo) are applied to the reverberated signal *after* it has been generated. This creates unique, evolving textures that are distinct from modulating the dry signal before or within the reverb itself.
Can I use this pedal with mono sources?
Yes, the Sunlight pedal features a stereo input and output, but it can also be used effectively with mono signals. Connect your mono source to the Left (Mono) input, and the Left (Mono) output can be sent to your amplifier or the next pedal in your chain.
What type of power supply is required?
The pedal requires a standard 9V DC center-negative power supply. It is not recommended to use higher voltages, as this could damage the pedal. An isolated power supply is recommended to minimize noise.
How do I control the modulation effects?
The pedal offers controls for adjusting the modulation's rate, depth, and character. Additionally, MIDI control allows for external manipulation of these parameters and preset recall.
Does it have different reverb types?
The Sunlight is designed to provide a specific type of modulated reverb experience. While it doesn't offer discrete 'hall,' 'plate,' or 'spring' modes, its core design allows for a wide range of unique, evolving reverb textures through its modulation capabilities.
What MIDI messages can control the pedal?
The pedal can respond to various MIDI messages, including Note On/Off for triggering and CC (Control Change) messages for parameter control. Refer to the product manual for a detailed list of assignable CC messages.
Troubleshooting
No sound when pedal is engaged
Check that the power supply is correctly connected and providing sufficient power. Verify that all audio cables are securely plugged into the correct input and output jacks.
Modulation sounds erratic or unexpected
Review the pedal's manual for specific control settings related to modulation depth, rate, and type. Ensure MIDI settings, if used, are configured correctly to avoid conflicting commands.
MIDI control is not functioning
Confirm that the MIDI cable is connected to the correct MIDI In port. Ensure your MIDI source is sending compatible messages and that the pedal's MIDI channel is set correctly. Check for firmware updates if applicable.
Hum or noise in the audio signal
Try using a different power supply, preferably a dedicated isolated power supply, to rule out ground loop issues. Ensure all audio cables are well-shielded.
Pros and Cons
Pros
- Expands sonic possibilities beyond traditional reverb.
- Stereo operation enhances spatial imaging.
- MIDI control offers advanced integration and automation.
- Unique modulation after reverb creates evolving textures.
- High-quality build and reliable performance.
Cons
- Can have a steeper learning curve due to advanced features.
- May be overkill for users only needing basic reverb.
- MIDI implementation may require additional setup and understanding.
- Potential for complex signal chains affecting perceived latency.
Setup, Compatibility & Care
Setup: Connect your instrument or synth to the Left (Mono) input and the Right input if using stereo. Connect the Left (Mono) output and Right output to your amplifier or next pedal in the chain. Power the pedal using a standard 9V DC center-negative power supply (not included). For MIDI control, connect a MIDI cable from your controller or sequencer to the MIDI In jack.
Compatibility: The Sunlight pedal is compatible with standard mono and stereo instrument or line-level signals. It works with most guitar and synthesizer setups. Ensure your MIDI controller or sequencer is configured to send appropriate MIDI messages (Note On/Off, CC messages) to control the pedal's functions.
Care: Keep the pedal away from excessive moisture and extreme temperatures. Clean the exterior with a dry or slightly damp cloth. Avoid using solvents or abrasive cleaners. Ensure all connections are secure during use to prevent damage.