Heatsure Woodburning Stove - 10KW - JA006

The Heatsure 10KW stove is a multifuel model, meaning you can burn dry, seasoned logs (hardwood is recommended for longer burn times) and approved solid fuels like smokeless coal. Avoid burning treated wood, household waste, or anything that could produce harmful fumes.

It's best to remove ash regularly, typically once a day or every other day, depending on usage. Do not allow ash to build up to the level of the grate, as this can restrict airflow, reduce efficiency, and potentially damage the grate.

The airwash system is a design feature that directs a curtain of pre-heated air down the inner surface of the glass. This air flow creates a barrier that helps burn off combustible gases before they can deposit soot or tar on the glass, keeping your view of the fire clear.

Yes, for safety and compliance with local building regulations and standards (e.g., HETAS in the UK), it is highly recommended that a qualified and certified installer installs your woodburning stove and flue system.

Cast iron is an excellent material for stoves because it heats up relatively quickly, retains heat for a long time after the fire has died down, and radiates heat very efficiently into the room. Its inherent strength and durability also contribute to a long lifespan for the stove.

A 10KW stove is generally suitable for heating larger rooms or open-plan areas, typically ranging from 100 to 200 cubic meters, depending on factors like insulation, ceiling height, and external temperature. For precise sizing, consulting with a professional installer is recommended.

Ensure you are using dry, seasoned wood with a moisture content below 20%. Check if the primary and secondary air vents are fully open and if the chimney flue is clear. Too much ash in the firebox can restrict airflow; empty the ash pan regularly.

Check for blockages in the flue or chimney. Ensure the flue damper (if present) is fully open. A cold chimney can also cause downdraft; try burning some newspaper to warm the flue before lighting a full fire. Ensure your room has adequate ventilation.

This often indicates burning unseasoned or wet wood, or operating the stove at too low a temperature. Ensure wood moisture content is below 20%. Also, check if the airwash vent is clear and not obstructed by ash or debris, and try burning at a hotter temperature.

Inspect the rope seal around the door for wear and tear, flattening, or hardening. If it's compromised, it will need to be replaced to maintain an airtight seal and optimal burning efficiency. Ensure the door latch closes tightly.