Best current price£10.19from eBay
Shopping.co.uk recommended and popular offers
eBay£10.19Visit shop UPOL Power Can Clear Coat Lacquer Top Coat Fast Drying High Gloss Aerosol 500ml
Visit shopeBay£12.95Visit shop UPOL Power Can Clear Coat Lacquer Top Coat Fast Drying High Gloss Aerosol 500ml
Visit shop11 offers from £10.19 - £27.53
View price history by clicking the chart icon.
The U-Pol Power Can Clear Lacquer is an essential tool for automotive enthusiasts and professionals who need a high-quality, durable clearcoat finish for touch-ups and small panel repairs. This 500ml aerosol provides excellent flow and a high-gloss aesthetic without the need for professional spray equipment, though users should note it requires proper ventilation and careful application technique to avoid runs or orange peel texture.
| Model Part Number | PCLC/AL-4 |
|---|---|
| Brand | U-Pol |
| Container Volume | 500ml |
It is designed for automotive applications. Ensure your base coat is fully cured and compatible with aerosol clearcoats before application.
Generally, if you apply coats within the recommended recoat time, sanding is not required. If you exceed the recoat time, light sanding with fine-grit paper may be necessary for adhesion.
Yes, it is formulated to provide a durable finish that resists yellowing and environmental UV exposure.
Application is best performed in temperatures between 15°C and 25°C with moderate humidity.
Drying times vary based on thickness and ambient temperature. It is usually touch-dry in a short time, but full curing can take 24 hours or longer.
Usually caused by holding the can too far away or improper temperature. Ensure consistent distance and follow recommended ambient temperature ranges.
This is caused by applying coats that are too heavy. Use lighter, multiple passes rather than one thick application.
After use, invert the can and spray for a few seconds to clear the valve. If blocked, soak the nozzle in thinners or replace it.
Before applying the lacquer, ensure the surface is clean, dry, and free from any contaminants like wax or grease. The base coat must be fully dry according to the manufacturer's instructions before clearcoating. Always shake the can vigorously for at least two minutes before use. Maintain a distance of 15-20cm from the surface during spraying. For storage, turn the can upside down and spray briefly until clear to prevent the nozzle from clogging. Store in a cool, dry place away from direct sunlight.
