Best current price£24.24from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£24.24Visit shop Sip 03667 4 Ton Bottle Jack
Visit shop
B&Q£54.95Visit shop B&Q - 8 Ton Bottle JackL12 X W13 X H21 Cm
Visit shop15 offers from £24.24 - £99.99
View price history by clicking the chart icon.
The SIP 4 Tonne Bottle Jack is designed for professional mechanics, DIY automotive enthusiasts, and garage environments requiring a reliable, heavy-duty solution for lifting cars and light vans. Its primary benefit is providing superior stability and load support through a wide cast iron base and integrated safety features. The main caveat is that, as a bottle jack, it requires a specific vertical lifting point on the vehicle chassis and is not suitable for lifting vehicles with very low ground clearance.
| Brand | SIP |
|---|
The jack has a minimum height of 183mm and a maximum height of 354mm, which can be further adjusted using the 60mm screw extension.
No. Always operate the jack on a firm, level, and stable surface to prevent the unit from sinking or tipping.
This model is rated for 4 tonnes. Please check the weight of your vehicle. For heavier loads, SIP offers 8, 12, and 20-tonne variants.
Yes, it includes a standard SIP two-year silver warranty.
It is recommended to store the jack in an upright, vertical position to prevent hydraulic fluid leaks.
Check the release valve to ensure it is fully closed by turning it clockwise. Also, verify that the load does not exceed the 4-tonne capacity.
This often indicates air in the hydraulic system. Bleed the system by opening the release valve and pumping the handle several times to purge trapped air.
The hydraulic oil level may be low. Inspect for leaks and refill with high-quality hydraulic jack oil if necessary.
Before using the jack, always inspect the hydraulic unit for signs of fluid leaks. To set up, place the jack on a flat, concrete surface to ensure the cast iron base is fully supported. Use the screw extension to fine-tune the height before applying the load.
For maintenance, keep the piston clean and free of debris to prevent seal damage. Periodically check the oil level if the lifting performance begins to drop, and ensure the safety valve is not obstructed. The unit is backed by the SIP two-year standard silver warranty, provided it is used according to the manufacturer guidelines.
