Garden Watering Tap - 3/4" (26mm hole) - Black
Best current price£9.19from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£9.19Visit shop B&Q - 3/4" (26mm Hole) Garden Watering TapWater Butt/rain Barrel Outlet ValveHose
Visit shopB&Q£9.19Visit shop One Offer
1 offer from £9.19
View price history by clicking the chart icon.
B&QB&Q - 3/4" (26mm Hole) Garden Watering TapWater Butt/rain Barrel Outlet ValveHose
Free delivery in 1–3 days
£9.19
Visit shop
Product Information
Full details
This adaptor kit is designed for gardeners who want to easily connect their water butt or storage tank to a garden hose. It provides reliable water flow control, a key benefit for efficient watering. A potential caveat is the requirement for a 26mm hole for installation. The kit includes an adaptor, a flow control valve, and a universal hose connector, simplifying water management from your water storage.
All features
| Colour | Black |
|---|---|
| Brand | B2C |
Extended Product Information
FAQs
What size hole do I need to drill for the adaptor?
You need to drill a 26mm diameter hole in your water butt or storage tank for the adaptor to fit.
Is the hose connector compatible with all garden hoses?
The kit includes a universal male click-lock connector, which is compatible with most standard hose connector brands. The connector can also be removed for direct attachment of male or female fittings.
How do I control the water flow?
The kit includes a smooth-turn flow control valve that screws onto the adaptor. Simply turn the valve handle to adjust the water flow from off to full stream.
Can I use this with a mains water tap?
This adaptor kit is designed specifically for connecting water butts and storage tanks to garden hoses, not for direct connection to mains water taps.
What comes included in the kit?
The kit includes the adaptor, a secure nut and washer, a flow control valve, and a universal male click-lock hose connector.
How do I clean the flow control valve?
If the valve becomes blocked or its performance is reduced, unscrew it from the adaptor and clean the internal components with water. Ensure it is free from debris before reattaching.
Can the flow control valve be replaced if it breaks?
The flow control valve uses standard threading, so a replacement with compatible threading can be used if needed. However, it is designed for durability under normal garden use.
Troubleshooting
Water leakage at the connection point
Ensure the nut and washer are tightened securely on the adaptor. Check for any debris on the tank surface or adaptor seal.
Low or no water flow
Verify that the flow control valve is fully open. Check for any blockages in the valve or hose. Ensure the water butt/tank has sufficient water level.
Hose connector does not click securely
Try removing the click-lock connector and attaching a male or female fitting directly if compatible. Ensure the hose end is clean and undamaged.
Adaptor does not fit the drilled hole
Confirm the hole is exactly 26mm in diameter. If slightly off, minor adjustments may be needed, but ensure a snug fit for a proper seal.
Pros and Cons
Pros
- Simplifies connecting water butts to garden hoses.
- Offers precise control over water flow.
- Compatible with most standard garden hose systems.
- Allows for flexible hose fitting attachment.
- Easy to install with minimal tools required.
Cons
- Requires drilling a 26mm hole in the water butt/tank.
- The click-lock connector might not fit all hose types perfectly.
- Primarily designed for water butts and storage tanks, not direct tap connection.
Setup, Compatibility & Care
Setup:
- Ensure your water butt or storage tank has a flat surface where the adaptor will be installed.
- Drill a 26mm diameter hole at the desired location.
- From the inside of the tank, insert the adaptor through the hole.
- On the outside, secure the adaptor using the provided nut and washer. Tighten firmly but avoid overtightening.
- Screw the flow control valve onto the end of the installed adaptor.
- Attach your garden hose to the universal click-lock connector.
Compatibility:
- The adaptor requires a 26mm hole for installation.
- The included male click-lock connector is designed to be compatible with most standard garden hose connector brands. The connector can be removed to attach male or female fittings.
Care:
- Periodically check the connection for leaks and tighten if necessary.
- Ensure the flow control valve is clean and free of debris. If flow is restricted, unscrew the valve and clean the internal components with water.
- Store the adaptor kit in a dry place when not in use to prolong its lifespan.