Leaf Shadow Splash Back - Benjamin Tate Design

The splashback measures 600cm in length and 75cm in height.

Yes, toughened glass is designed to shatter into small, relatively harmless pieces if broken, rather than sharp shards.

It is not recommended to cut toughened glass, as this can compromise its structural integrity and cause it to break. Professional cutting is complex and may not be feasible.

Use a high-strength, clear, silicone-based adhesive specifically designed for glass and suitable for kitchen environments. Always check the adhesive manufacturer's recommendations.

While the high-gloss finish is attractive, it can be susceptible to scratches from abrasive materials. Gentle cleaning methods are recommended to preserve its finish.

It is generally best to install on a flat, smooth, and stable wall surface. If the tiles are perfectly flat and adhered securely, it might be possible, but it's often recommended to remove old wall coverings for optimal adhesion and a seamless finish.

The product description does not mention pre-drilled holes. Typically, glass splashbacks are installed as a solid panel, and any necessary cut-outs for sockets would need to be done professionally before installation, or the splashback fitted around existing fixtures.

This may indicate the wall surface was not perfectly flat. Ensure all adhesive has cured. Minor unevenness may be difficult to correct without reinstallation.

This suggests air was trapped during installation. It is best to address this during the initial fitting process. If bubbles are significant, reinstallation might be necessary.

Lighting conditions can affect color perception. View the splashback in different lighting. Ensure the correct product has been received by checking labels.

Try a dedicated glass cleaner, applied sparingly to a soft cloth, and wipe gently. Avoid prolonged contact with harsh chemicals.