Theben Motion Detector - LUXA 103
Best current price£55.09from Tameson UK
Best offers
Shopping.co.uk recommended and popular offers
Tameson UK£55.09Visit shop Theben Luxa 360 Degree Ceiling Mount Presence Detector 12M Range - 1030062
Visit shopTameson UK£55.09Visit shop All Offers
3 offers from £55.09 - £78.90
View price history by clicking the chart icon.
Tameson UKTheben Luxa 360 Degree Ceiling Mount Presence Detector 12M Range - 1030062
Free delivery in 1–3 days
£55.09
Visit shop
Theben Dual Channel 360° Ceiling Motion Detector Luxa 103 - 1030063Free delivery in 1–3 days£67.04Visit shop →
Lights.co.ukTheben Presence Detector Luxa 103 S360-100-12 Ap Wh, Surface-Mounted
£4.99 delivery
£78.90
Visit shop
Product Information
Full details
The Theben LUXA 103 is an advanced PIR motion detector designed for efficient and reliable automation of lighting and HVAC systems. It's ideal for homeowners and facility managers looking to enhance convenience and save energy in indoor and outdoor spaces. While offering extensive coverage and dual-channel control, users should be aware of its specific mounting height recommendations for optimal performance.
All features
| Model Part Number | 1030063 |
|---|---|
| Brand | THEBEN |
Extended Product Information
FAQs
What is the maximum area the LUXA 103 can cover?
The device offers a 12-meter diameter detection range, covering approximately 113m² at a mounting height of 3 meters. The presence detection range is up to 50 m².
Can this motion detector be used outdoors?
Yes, with its IP54 protection rating, the LUXA 103 is suitable for indoor and outdoor use, offering protection against dust and water splashes.
What type of lighting is recommended for use with this detector?
It is optimized for LED lighting, with a switching capacity of up to 400W for LEDs. It can also switch other lighting types up to 2300W.
How do I adjust the sensitivity of the motion detection?
Sensitivity and response value luminosity can be adjusted using the device's controls or via remote control, allowing you to fine-tune its operation to your specific environment.
What is the purpose of the HVAC control channel?
The potential-free HVAC control channel allows the detector to integrate with your heating, ventilation, and air conditioning system, automating climate control based on occupancy to save energy.
What is the recommended mounting height for optimal performance?
The optimal mounting height for the LUXA 103 is 3 meters above the floor for maximum coverage and accurate detection.
Does the device require a separate power supply?
Yes, the device operates on a 230V AC power supply.
Troubleshooting
Device does not power on
Verify that the 230V AC power supply is correctly connected and that the circuit breaker is engaged. Check all wiring connections.
Lights do not turn on when motion is detected
Ensure the lighting channel is correctly wired and the response value luminosity is set appropriately (not too high for current light conditions). Check if the manual override switch is in the correct position.
Lights do not turn off after leaving the area
Increase the switch-off delay setting. Ensure the sensor is not detecting residual motion or is not being triggered by heat sources nearby. Re-evaluate the detection zone setup.
HVAC control is not functioning
Confirm that the HVAC channel is wired correctly to the thermostat or HVAC unit. Verify that the detection logic for HVAC control is configured as intended.
Inconsistent detection
Check the mounting height; ensure it is close to the recommended 3 meters. Clear any obstructions in the detection path. Adjust the sensitivity settings if necessary.
Pros and Cons
Pros
- Wide detection range (12m diameter) covers large areas effectively.
- Dual channels (lighting and HVAC) provide versatile automation capabilities.
- IP54 rating makes it suitable for various environments, including damp or dusty conditions.
- Optimized for LED loads, ensuring compatibility with modern lighting.
- Remote control and teach-in functions offer user-friendly operation and setup.
- Energy-saving potential through automated control of lights and HVAC.
Cons
- Optimal performance is dependent on correct mounting height (3m recommended).
- Maximum detection range for presence is 50 m², which might be less than the total floor coverage.
- Requires a 230V AC power supply.
- Advanced features may require a learning curve for initial setup.
- The maximum transmission range sideways is limited to 6m.
Setup, Compatibility & Care
Setup: The LUXA 103 is designed for ceiling or surface mounting. Ensure the device is mounted at the recommended height of 3 meters for optimal detection. Connect the 230V AC power supply and wire the lighting and HVAC circuits according to the provided diagram. Utilize the teach-in function to set the desired ambient light level and adjust sensitivity settings as needed. Remote control operation can be enabled for easier adjustments.
Compatibility: This motion detector is compatible with standard 230V AC power systems and suitable for switching incandescent, halogen, and particularly LED loads up to 400W. The potential-free HVAC channel can be integrated with most standard heating, ventilation, and air conditioning systems. Ensure the connected circuits do not exceed the maximum switching power of 2300W.
Care: To maintain optimal performance, periodically clean the sensor lens with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the thermoplastic casing or the sensor. Ensure the device remains free from excessive dust or moisture buildup, especially in outdoor applications, to preserve its IP54 rating.