Best current price£77.03from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£77.03Visit shop Yonico 13515 5 Bit Bullnose Router Bit 1/2-Inch Shank 732454889893
Visit shop1 offer from £77.03
View price history by clicking the chart icon.
The YONICO 13115 Bullnose Router Bit Set is designed for woodworkers looking to add a clean, rounded edge to various projects. This set offers five different radius sizes, allowing for versatile bullnose profiles on shelves, tabletops, and furniture. A potential consideration is that the larger bit sizes require a 1/2" shank, limiting compatibility with some routers.
| Model Part Number | 13515 |
|---|---|
| Brand | YONICO |
The radius is the measurement from the center of the circle to its edge (e.g., 1/4" radius). The bead size is the full diameter of the rounded profile created (e.g., 1/2" bead diameter).
No, this specific set features 1/2" shanks. You would need a router with a 1/2" collet or a collet reducer (if available and suitable for your router model) to use these bits.
To create dowels, you typically make two passes with the bullnose bit. The first pass cuts one half of the dowel shape, and the second pass, after flipping the workpiece or adjusting the router, cuts the other half to form a complete cylinder.
C3 micro-grain tungsten carbide is a high-quality material that provides exceptional hardness and wear resistance, resulting in a sharper cutting edge that lasts significantly longer than standard carbide.
After use, clean the bits with a soft brush or a cloth lightly dampened with mineral spirits or denatured alcohol to remove resin and wood dust. Ensure they are completely dry before storing.
The maximum depth of cut depends on the router's capabilities and the specific bit's dimensions. It's generally recommended to make multiple shallow passes rather than one deep pass for cleaner results and to avoid straining the router.
Yes, these bits can be used on MDF and particle board. However, due to the abrasive nature of these materials, expect the cutting edges to dull faster than when used on solid wood.
Ensure the bit is sharp. Reduce the depth of cut per pass. Increase feed rate slightly, or ensure consistent feed rate. Check that the router speed is appropriate for the bit size and material.
Verify the bit is fully seated in the collet. Ensure the collet is clean and free of debris. Check that the collet nut is tightened securely. Inspect the router's spindle for damage.
Ensure the workpiece is held firmly against the router fence or table. Check that the router's depth adjustment is locked in place. Make sure you are using a consistent feed rate.
Double-check that you are using the correct bit for the intended radius. Ensure the depth of cut is set correctly to achieve the full profile. For dowel creation, confirm you are making two passes as instructed.
Setup:
Compatibility:
Care:
