Best current price£5.98from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£5.98Visit shop Timco 125450Lth Timber Hangers - Long Leg - Galvanised 125 X 150 To 250 Unit 1
Visit shop
B&Q£12.31Visit shop B&Q - TimcoTimber HangersLong LegGalvanised (Size 125 X 150 To 2501 Each)
Visit shop5 offers from £5.98 - £76.19
View price history by clicking the chart icon.
The Timco Long Leg Timber Hanger is an essential structural component designed for professional builders and contractors tasked with deep timber-to-timber applications, such as loft conversions or under-slung joist installations. Its primary benefit is the extended leg length, which allows for stable support in scenarios where the joist must sit lower than the supporting beam; however, users should note that precise installation and adherence to nail patterns are required to meet load-bearing certifications.
| Colour | Grey |
|---|---|
| Model Part Number | 125450LTH |
| Brand | TIMCO |
This hanger is designed to accommodate timber joists up to 250mm deep.
This product is designed for Service Class 2 environments (protected indoor or semi-enclosed) and is not suitable for harsh outdoor exposure.
The hanger is designed for use with 3.75mm diameter structural nails.
Yes, it conforms to Eurocode 5 standards and has been tested to BS 5268 for safe working loads.
The hanger features 46 nail holes to allow for flexible and secure fixing patterns.
Check for debris behind the hanger flange or ensure the supporting timber beam is not bowed or deformed.
Ensure you are using the correct 3.75mm diameter nails and that you are not hitting an internal knot or localized hardening in the timber frame.
To install, ensure the supporting beam surface is level and clean. Position the hanger such that the base meets the required depth, and secure using 3.75mm structural nails in all provided holes. The hanger is compatible with timber joists up to 250mm in depth and 125mm in width. While the pre-galvanised finish offers excellent corrosion resistance, avoid cutting or drilling the hanger, as this will compromise the galvanised coating and structural integrity. Store in a dry area prior to installation to prevent surface oxidation.
