Best current price£15.80from Debenhams
Shopping.co.uk recommended and popular offers
Debenhams£15.80Visit shop Living And Home Unisex Green 10Pcs 3D Rectangle Straight Pattern Self-Adhesive Wall Tile Stickers In
Visit shop4 offers from £15.80 - £29.17
View price history by clicking the chart icon.
This guide is for homeowners and renters looking to refresh their living spaces with a stylish and practical update. The Living and Home Self-Adhesive Wall Tile Stickers offer a quick, durable, and visually appealing way to enhance walls, particularly in areas prone to moisture. A potential caveat is that adherence may vary based on surface preparation and type.
| Colour | Green |
|---|---|
| Pattern | Geometric |
| Model Part Number | 0000736602363 |
| Brand | Living and Home |
Yes, they can be removed. For easier removal, gently heat the stickers with a hairdryer on a low setting and peel slowly. Some residue may remain, which can be cleaned with a mild adhesive remover.
Yes, they are safe for kitchen use as they are waterproof, oil-resistant, and easy to clean, making them suitable for backsplashes.
The 3D effect refers to the visual depth and texture that the stickers provide, making them appear more like real tiles compared to flat stickers.
These stickers are best applied to smooth, flat surfaces. If your existing tiles have very deep grout lines or a significant texture, adhesion might be compromised. Clean existing tiles thoroughly before application.
Measure the area you want to cover. Use a ruler and a sharp craft knife or precision scissors to cut the stickers. You can also hold a sticker loosely against the wall to mark cut lines before removing the backing.
Avoid applying them to rough, uneven, textured, or porous surfaces such as brick, unfinished wood, concrete, or heavily textured wallpaper. Also, avoid areas with excessive moisture or direct water exposure unless specified for such use.
Simply wipe the surface with a damp cloth and mild soap as needed. Avoid abrasive cleaners that could damage the protective coating.
Ensure the wall surface is completely clean, dry, and smooth before application. Reheat edges gently with a hairdryer and press firmly. Avoid applying to textured or unsuitable surfaces.
Use a pin to carefully prick the bubble and then smooth the sticker down firmly with your finger or a soft cloth. For future applications, apply slowly and smooth as you go.
Gently lift the edge and reapply, ensuring firm pressure. A hairdryer on a low heat setting can help make the adhesive more pliable for reapplication. Ensure the surface was adequately prepared.
Use a sharp craft knife or precision scissors on a cutting mat for cleaner lines. A ruler can help guide your cuts.
Setup:
Ensure the surface you intend to apply the stickers to is clean, dry, and smooth. Remove any dust, grease, or moisture. For best results, avoid applying to textured, uneven, or freshly painted walls (allow paint to cure for at least 4 weeks). Measure your desired area and carefully cut the stickers to size using scissors or a utility knife. Peel off the backing paper and apply the sticker, starting from one edge and smoothing outwards to minimize air bubbles. Overlap edges slightly for a seamless look if desired.
Compatibility:
These stickers are best suited for smooth, non-porous surfaces such as painted drywall, glass, metal, or existing smooth tiles. They are not recommended for use on brick, unpainted wood, concrete, or heavily textured wallpaper.
Care:
To clean, use a soft, damp cloth. For tougher spots, a mild soap solution can be used. Avoid abrasive cleaners or scouring pads, as these can damage the surface. Wipe spills immediately to prevent staining.
