Bristan 3/4 Inch Bath Tap Reviver - Chrome
Best current price£71.47from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£71.47Visit shop B&Q - R 3/4 Ch Tap Reviver 3/4 Crosshead Chrome Bath Pillar Taps Pair 3/4" Tap
Visit shopB&Q£71.47Visit shop One Offer
1 offer from £71.47
View price history by clicking the chart icon.
B&QB&Q - R 3/4 Ch Tap Reviver 3/4 Crosshead Chrome Bath Pillar Taps Pair 3/4" Tap
Free delivery in 1–3 days
£71.47
Visit shop
Product Information
Full details
This Bristan 3/4 Inch Bath Tap Reviver in Chrome is designed for homeowners looking to refresh their existing bath pillar taps without a full replacement. Its key benefit is providing a modern aesthetic update and functional new handles and valves for common tap sizes, though it requires careful measurement to ensure compatibility with your existing tap body.
All features
| Colour | Silver |
|---|---|
| Model Part Number | R-3/4-CH |
| Brand | Bristan |
Extended Product Information
FAQs
What size taps is this reviver compatible with?
This reviver is designed for most 1/2" 5412, 3/4" 5412, and 3/4" 1010 bath pillar taps.
Does this product include new tap bodies?
No, this product is a reviver kit. It includes new handles and internal valve mechanisms to refresh existing tap bodies, not the entire tap structure.
How do I know if I have a 3/4" 5412 or 3/4" 1010 tap?
These are standard UK tap valve sizes. If your tap is a standard bath pillar tap, it is likely one of these. You may need to remove your old valve to confirm its specific size or consult your home's plumbing documentation.
What is included in the kit?
The kit includes a pair of chrome crosshead handles, standard valves, and a selection of spacers and washers to fit various tap seating depths.
Can I use this on shower taps?
This product is specifically designed for bath pillar taps. Compatibility with shower taps would depend on whether they share the same valve and fitting specifications.
How often should I replace my tap valves?
Tap valves typically need replacing when they start to leak or become difficult to operate. This reviver kit provides a convenient way to replace them.
Troubleshooting
Tap still drips after installation
Ensure the valve is tightened correctly. Check if the correct spacer and washer combination was used to seat the valve properly. If the problem persists, the tap body itself might be damaged.
Handle is difficult to turn
Verify that the handle is not overtightened onto the valve stem. Ensure no debris is obstructing the handle's movement.
Water leaks around the handle base
Check that the bonnet or shroud is securely tightened onto the tap body. Ensure any O-rings or washers in that area are present and in good condition.
Product does not fit existing tap
Double-check your tap's original valve size against the compatibility list (1/2" 5412, 3/4" 5412, 3/4" 1010). Confirm that the correct spacers were attempted for your specific tap seating depth.
Pros and Cons
Pros
- Revitalizes existing taps with a modern chrome finish.
- Includes all necessary components (handles, valves, spacers) for a complete revival.
- Offers a cost-effective alternative to replacing entire tap sets.
- Designed for user-friendly installation.
- Enhances the aesthetic appeal of the bathroom.
Cons
- Requires accurate measurement of existing tap to confirm compatibility.
- Only revives the handles and internal valves, not the entire tap body.
- May not fit non-standard or very old tap models.
- Installation might require basic DIY skills or a plumber.
Setup, Compatibility & Care
Compatibility:
Before purchasing, it is crucial to measure your existing tap to ensure it matches the 1/2" 5412, 3/4" 5412, or 3/4" 1010 specifications. The included spacers and washers help accommodate various tap seating depths, but the core valve size must be correct.
Setup:
- Turn off the main water supply to the bathroom.
- Carefully remove the old tap handles and bonnets.
- Unscrew and remove the old valve mechanisms.
- Select the appropriate spacer and washer for your tap seating depth.
- Insert the new valve mechanism.
- Screw on the new crosshead handles.
- Turn the water supply back on and test for leaks.
Care:
To maintain the chrome finish, clean regularly with a soft, damp cloth. Avoid abrasive cleaners or scouring pads, as these can scratch the surface. For stubborn marks, use a mild, non-abrasive bathroom cleaner.