Best current price£117.29from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£117.29Visit shop Testo 0602 4592 Temperature Probe With Clamping Bracket (Tc Type K) 4029547004254
Visit shop4 offers from £117.29 - £160.64
View price history by clicking the chart icon.
The Testo 0602 4592 is a Type K thermocouple temperature probe designed for efficient surface temperature measurements on pipes. Ideal for professionals in medical technology, food transportation, and refrigeration, its key benefit is rapid, accurate readings across a wide temperature range, facilitated by its clamping bracket. A potential caveat is its short-term maximum temperature limit of +280°C.
| Model Part Number | 0602 4592 |
|---|---|
| Brand | Testo |
The probe can continuously measure temperatures from -60°C to +130°C.
Yes, it can measure temperatures up to +280°C, but only for short periods. Continuous measurement at these higher temperatures is not recommended.
The probe is designed for pipe diameters ranging from 5 mm to 65 mm.
Yes, this probe requires a compatible Testo measuring instrument. A list of compatible models is provided in the compatibility section.
Gently wipe the measuring head with a soft, damp cloth. Avoid using abrasive cleaners or submerging the probe in water.
Type K refers to the specific construction of the thermocouple, using nickel-chromium and nickel-alumel wires, which are suitable for a wide temperature range and offer good corrosion resistance.
No, the probe comes with a fixed 1.2-meter cable that is not detachable or extendable.
Ensure the probe is securely connected to a compatible Testo instrument. Verify that the instrument is powered on and set to the correct measurement mode for a Type K thermocouple. Check the probe's cable for any visible damage.
Ensure the clamping bracket is securely fastened to the pipe for good thermal contact. Clean the probe's measuring surface and the pipe surface. Allow sufficient time for the probe to stabilize at the pipe temperature. Verify the instrument is calibrated.
Inspect the probe and cable for any breaks or damage. If damage is found, the probe may need to be replaced. Contact Testo support for assistance or consider replacing the exchangeable measuring head if applicable and the damage is confined to it.
Setup: Connect the probe's fixed 1.2-meter cable to a compatible Testo measuring instrument. Ensure the connection is secure. Attach the probe to the pipe using the integrated clamping bracket, adjusting it to fit snugly around the pipe's circumference.
Compatibility: This probe is compatible with various Testo instruments, including:
Care: To ensure optimal performance and longevity:
