PlastiKote Spray Paint - Willow Green

The paint is typically touch-dry in 15-20 minutes and dry to handle in 1-2 hours, depending on temperature and humidity. Full cure can take up to 24 hours.

This product is designed for hard surfaces like wood, metal, and plastic. It is not recommended for use on fabric.

For best results and optimal color, apply two to three light, even coats. Allow each coat to dry sufficiently before applying the next.

While durable, it is not specifically formulated for prolonged direct contact with soil. It is best used on the exterior of planters or items that have a barrier from constant soil moisture.

Avoid using on surfaces that are heavily oiled, waxed, or dirty. It is also not suitable for items that reach very high temperatures or are subject to constant abrasion.

Yes, provided the existing paint is sound, clean, and dry. Lightly sand glossy surfaces before applying PlastiKote for better adhesion.

Shake the can more vigorously. Ensure the nozzle is not clogged; if it is, remove and clean it gently with a solvent and a fine needle, then reattach.

Apply paint in lighter, thinner coats. Hold the can closer to the surface for subsequent coats if needed, but avoid excessive proximity. Ensure the can is held upright during application.

The surface may not have been properly prepared. Ensure it was clean, dry, and free from contaminants. Light sanding may be required for non-porous surfaces.

Color can appear differently on various surfaces. Ensure the surface was primed if necessary and consider applying an additional coat for deeper color saturation. View the color in natural light.