Setup, Compatibility & Care
Installation requires a 33mm mounting hole and a flat surface area of at least 50mm in diameter for the tap base to sit securely.
- Ensure the water system is depressurized before beginning installation.
- Pass the hoses through the 33mm hole and secure the base nut underneath the counter.
- Connect the 10mm barb fittings to your existing water lines using appropriate clamps to prevent leaks.
- If using a micro-switched system, ensure the electrical connectors are wired securely to your pump circuit.
For maintenance, wipe the exterior with a soft, damp cloth. Avoid harsh abrasive cleaners that may scratch the finish. During winterization, ensure the tap is opened and fully drained to prevent freezing damage to the ceramic cartridge.