Best current price£75.43from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£75.43Visit shop 02612A Hand Held Power Punch And Sheet Metal Hole Punch Kit, Various Size Hole Punch In 3/32" To 9/32", Heavy Duty For Metal, Leather, Compound 837013026129
Visit shop2 offers from £75.43
View price history by clicking the chart icon.
The Neiko 02612A is a powerful, durable hand-held metal punch designed for professionals and serious DIYers who need to create precise holes in various materials quickly. Its all-metal construction and hardened steel punches ensure clean cuts through up to 16-gauge sheet metal, plastic, and other materials. While it offers exceptional power and versatility for its size, users should be aware that achieving perfectly clean edges on thicker metals might require practice.
| Model Part Number | 02612A |
|---|---|
| Brand | Neiko |
The Neiko 02612A is rated for sheet metals up to 16 gauge. It can also punch through plastics, leather, and other softer materials within this thickness range.
Unscrew the punch holder cap, remove the old punch, insert the new punch, and screw the cap back on. Ensure the corresponding die is correctly positioned in the base before punching.
It is designed for mild steel, aluminum, and brass up to 16 gauge. It is not recommended for hardened steel or materials significantly harder or thicker than specified.
The throat depth measures 1-3/4 inches, allowing you to punch holes a significant distance from the edge of your material.
The kit includes seven quick-change, heat-treated punch and die sets with sizes ranging from 3/32" to 9/32".
Yes, its durable construction and precise punching capability make it suitable for both professional tradespeople and serious DIY enthusiasts.
Keep the punches and dies clean, lightly oiled to prevent rust, and store in a dry place. Ensure alignment is maintained between the punch and die.
Ensure the material is within the specified gauge limit (16 gauge for sheet metal). Verify the correct punch and die size are being used and properly seated. Apply firm, consistent pressure.
Confirm the material thickness is at its limit. Ensure the punch and die are sharp and free of burrs. Use a very smooth, steady pressing motion. For thicker materials, a secondary deburring step might be needed.
Check for any material debris lodged between the punch and die. Carefully try to rotate the punch slightly while applying gentle pressure. Do not force it excessively.
Ensure moving parts are clean and lightly lubricated. Check for any bending or damage to the punch or die, which could cause resistance.
Setup:
Compatibility:
Care:
