Shimano CS-HG50 10-Speed Cassette - 11-36T

You'll need a cassette removal tool, a chain whip, a lockring tool, and a torque wrench.

This cassette is designed for 10-speed HG-X MTB chains.

Clean your cassette regularly, ideally after every few rides, especially in muddy or dusty conditions.

Replace the cassette when the teeth are worn, or the shifting performance degrades significantly. Also, replace the chain at the same time.

While other 10-speed chains may work, Shimano HG-X chains are recommended for optimal performance.

The gear range is 11-36T.

The cassette is made from steel.

The weight is approximately 375g.

Check and adjust the rear derailleur cable tension and limit screws. Ensure the chain is compatible and in good condition. Clean or replace the cassette and chain if worn.

Ensure the cassette is compatible with your freehub body type. Check if any spacers are needed.

Ensure the lockring threads are clean and free of debris. Use the correct tool and apply the recommended torque.