Best current price£18.50from Hobbycraft Trading Ltd
Shopping.co.uk recommended and popular offers
Hobbycraft Trading Ltd£18.50Visit shop Trylon Latex Liquid Rubber 1 Litre 1L
Visit shop
The Range£27.99Visit shop West Design Moulding Latex - White
Visit shop2 offers from £18.50 - £27.99
View price history by clicking the chart icon.
West Design Moulding Latex is a high-performance liquid rubber emulsion designed for hobbyists, model-makers, and special effects artists looking to capture fine detail from master patterns. It offers exceptional surface reproduction on materials like plaster, clay, and wood, allowing users to create custom, peelable moulds with ease. While it provides excellent definition, users should be aware that the ammonia-based formula requires application in well-ventilated spaces and may require the addition of a thickener for use on non-porous surfaces.
| Model Part Number | WD345018 |
|---|---|
| Brand | West Design |
It is ammonia-based, so you must use it in a well-ventilated area to ensure proper air exchange and comfort.
Yes, but you will likely need to add a thickening agent to prevent the latex from running off the surface.
Drying time depends on the thickness of the application and the ambient humidity. Multiple thin layers will dry faster than one thick application.
Yes, the cured rubber surface can be painted to achieve a professional or custom look for your projects.
Yes, it is a water and ammonia-based emulsion.
The surface may be non-porous; add a thickening agent to the latex to increase viscosity and improve adhesion.
Ensure that enough layers were applied to provide sufficient thickness and strength to the mould before peeling.
Ensure the first layer is applied thinly and evenly to capture details, and allow complete drying time between subsequent coats.
To use this moulding latex, ensure your workspace is well-ventilated due to the ammonia content. Begin by coating your master pattern—if the master is very porous, consider a light release agent for easier removal. Apply the latex using a soft brush or by dipping, depending on the size of your project. If the consistency is too thin for your needs, add a compatible thickening agent in small increments until the desired viscosity is reached. After use, ensure the container lid is sealed tightly to prevent premature skinning or drying of the remaining latex. Store in a cool, dry place away from direct sunlight to maintain the shelf life of the emulsion.
