Thermaltake MAGCurve 360 Ultra ARGB Snow AIO CPU Liquid Cooler - White

Open the TT RGB PLUS 3.0 software, navigate to the AI Forge section, type your descriptive prompt (e.g., 'cyberpunk city night'), and the AI will generate background visuals. You can then select and apply these to the display.

The TT PlayLink app is designed to complement the desktop software for easier mobile management and uploading. For full functionality and advanced customization, the TT RGB PLUS 3.0 software on your PC is required.

The display supports JPG, GIF, PNG for images, and MP4, MOV, AVI for video files. Ensure files are within acceptable resolution and size limits for optimal playback.

The fan blades are designed to be easily detached. You can clean them with a damp cloth or rinse them with water. Ensure they are completely dry before reattaching them to the fan motors.

Thermaltake typically offers a limited warranty for their AIO liquid coolers. Please refer to the official Thermaltake website or the product manual for the specific warranty duration and terms for the MAGCurve 360 Ultra Snow.

Yes, the split-screen functionality in the TT RGB PLUS 3.0 software allows you to display different content, such as system monitoring on one side and weather on the other, or different custom images/videos.

The radiator is a slim 27mm in thickness, featuring a 20mm thickened copper chamber for enhanced cooling performance and easier installation in various PC cases.

Ensure the USB cable from the pump is securely connected to both the pump and an available USB 2.0 header on the motherboard. Verify that the TT RGB PLUS 3.0 software is installed and running correctly.

Check that the ARGB cables from the fans are properly connected to the pump unit or motherboard ARGB headers. Ensure the TT RGB PLUS 3.0 software is configured correctly for your lighting setup and that your motherboard's ARGB controller is compatible.

Verify that the pump is fully submerged in coolant (if applicable to the specific model setup, though AIOs are sealed). Ensure no air is trapped in the pump by mounting the radiator above the pump if possible or following specific bleeding procedures if outlined in the manual. Check for any obstructions.

Ensure the pump is running at an adequate speed. Check that the cooler is securely mounted to the CPU with even pressure. Verify that thermal paste was applied correctly and that all protective films were removed from the pump's base plate. Clean radiator fins and fan blades for optimal airflow.

Confirm that the fan power cables are correctly connected to the pump unit or motherboard fan headers. Check the fan speed settings within the TT RGB PLUS 3.0 software or BIOS to ensure they are not set to zero RPM mode if unexpected.