Best current price£13.99from eBay
Shopping.co.uk recommended and popular offers
eBay£13.99Visit shop Water Flow Ball Valve with Strainer and Handle Female x Female 1/2"" - 1"" BSP
Visit shop
B&Q£24.99Visit shop B&Q - 1/2 Inch Water Flow Rate Ball Valve With Strainer Female
Visit shop2 offers from £13.99 - £24.99
View price history by clicking the chart icon.
This Invena Ball Valve with Strainer is designed for homeowners and plumbers needing a reliable shut-off valve for water or heating systems. Its key benefit is providing secure flow control with an integrated strainer to prevent debris from entering. A potential caveat is its maximum temperature and pressure rating, which may not suit all industrial applications.
| Brand | Invena |
|---|
The valve has a maximum working temperature of 90°C and a maximum working pressure of 1.6 MPa.
No, this ball valve is designed and rated for water and heating systems only. It is not suitable for gas lines.
First, shut off the water supply to the valve. Then, carefully disassemble the section of the valve containing the strainer, clean the mesh thoroughly, and reassemble securely. Ensure no debris is left behind.
This means both ends of the valve have internal threads, designed to screw onto male-threaded pipes or fittings.
This valve is designed for 1/2" BSP threaded connections.
It is recommended to visually inspect the valve periodically for any signs of leaks or damage. Test its operation at least once a year to ensure it functions correctly.
Basic maintenance includes checking for leaks and cleaning the integrated strainer as needed, especially if you notice reduced water flow. Ensure the handle operates smoothly.
Ensure threads are properly sealed with PTFE tape or sealant. Check if the valve is fully closed. If leaking from the stem, the packing may need tightening or replacement.
Ensure the valve is fully open or closed. Debris might be lodged in the mechanism. For persistent stiffness, especially after prolonged use, professional servicing might be needed.
Check if the strainer is clogged. Shut off the water supply, disassemble the strainer, clean it, and reassemble. Ensure the valve is fully open.
If external corrosion or physical damage is observed, replace the valve immediately to prevent failure. Check for signs of internal damage if flow issues persist.
Setup: Ensure the main water supply is turned off before installation. Screw the female threads of the ball valve onto the corresponding male threads of your existing pipework. Use appropriate pipe sealant or PTFE tape to ensure a watertight seal. Open and close the valve a few times to ensure smooth operation.
Compatibility: This valve is designed for 1/2" BSP threaded connections. It is compatible with water and non-corrosive fluid systems operating within its specified temperature and pressure limits. It is not suitable for gas lines.
Care: Periodically check for leaks around the valve and handle. The strainer can be accessed for cleaning by shutting off the water, disassembling the valve where the strainer is located (consult specific model instructions if available), cleaning the mesh, and reassembling. Avoid using abrasive cleaners.
