Loctite Rear View Mirror Bonder - 0.5Ml (2 Pack)

While the bond sets rapidly, allowing for immediate placement, it is recommended to avoid disturbing the bond for at least 15 minutes for reliable adhesion. Full strength is typically achieved within a few hours.

This product is specifically designed for rear view mirrors and glass-to-metal bonding. It should be effective for side mirror glass if it attaches to a metal frame, but always check the specific attachment mechanism and consult the product's detailed instructions.

It is specifically formulated for bonding glass to metal. It is ideal for automotive rear view mirrors and other similar automotive glass-to-metal repair needs.

No special tools are required. The adhesive comes in small, easy-to-handle 0.5ml tubes with a precise applicator tip. Ensure you have cleaning supplies like isopropyl alcohol and lint-free cloths for surface preparation.

The durable formula is designed to withstand typical automotive environmental conditions, including moisture and temperature fluctuations, ensuring a reliable bond.

Unopened tubes, stored correctly in a cool, dry place, typically have a shelf life of 1-2 years. Refer to the packaging for specific expiration dates.

Ensure surfaces are thoroughly cleaned and dried. Remove all traces of old adhesive, oil, or grease. Reapply the bonder ensuring firm, continuous pressure during the initial bonding period.

Surface preparation may have been inadequate, or the bond was disturbed before full curing. Clean surfaces again and reapply, ensuring parts are held stationary for the recommended time (at least 15 minutes for full cure, though initial bond is faster).

Ensure the cap was properly sealed. If clogged, try gently warming the tube slightly in your hands and then carefully probing the applicator tip with a fine pin.