Grey Pointing Mortar, 310Ml Cartridge - Ready For Use - Volden

Drying time depends on environmental conditions, but it typically takes 24-48 hours for the mortar to fully cure. Avoid exposing the applied mortar to water during the curing process.

Yes, once fully cured, this mortar is paintable. Allow the mortar to cure completely before painting.

The shelf life is typically 12 months when stored in a cool, dry place. Always check the expiration date on the cartridge.

You'll need a caulking gun, a utility knife or scissors to cut the tip, a pointing tool or wet sponge for smoothing, and potentially a wire brush for surface preparation.

While it can be used in some areas of a fireplace, it may not be suitable for high-heat areas. Always check the specific requirements for your fireplace before application.

Use a damp cloth or sponge to clean up excess mortar while it is still wet. Once dried, it may be more difficult to remove.

The mortar offers good water resistance but is not completely waterproof. It provides a good seal against water ingress in masonry joints.

Check the caulking gun and ensure the plunger is engaging the cartridge correctly. Ensure the tip is cut appropriately and there is no blockage.

Ensure the surface is properly prepared and dry before application. Avoid applying in extreme temperatures or direct sunlight. The mortar may need more time to cure.

Test the mortar in an inconspicuous area before applying it to a larger area to check for color match.