Best current price£15.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.99Visit shop B&Q - Flexyfix Fast-Curing Elastic Adhesive For Grp Flooring Sheets And Stair NosingsSolvent-FreeHigh Bond Strength (1X 290Ml)
Visit shop1 offer from £15.99
View price history by clicking the chart icon.
Rewmar Flexyfix is a high-performance, single-component hybrid polymer adhesive designed for professional installers and dedicated DIYers who require rapid, reliable bonding for diverse materials like wood flooring, stair nosings, and skirting boards. Its primary benefit is a massive holding strength of 380kg per cm² combined with a fast-curing, solvent-free formula that maintains essential elasticity over time, though users should note it requires a clean, dust-free substrate to ensure the maximum bond integrity the product is known for.
| Colour | White |
|---|---|
| Model Part Number | FLEXY290 |
| Brand | Rewmar |
While it is a robust hybrid polymer, it is primarily designed for internal professional flooring and joinery installations.
Generally, no, provided the surface is clean, sound, and free of dust or oils.
The adhesive is fast-curing, but final bond strength depends on ambient temperature and humidity; allow 24 hours for full strength.
Yes, its thick consistency allows for minor gap-filling, though excessive gaps should be minimized for the strongest bond.
Once fully cured, most hybrid polymer adhesives can be painted with high-quality water-based paints, but testing on a small area first is recommended.
If properly capped and stored in a cool environment, it can typically be reused, but for best performance, use within a reasonable timeframe after opening.
Ensure the nozzle is cut wide enough and check that the temperature of the cartridge isn't too cold, as low temperatures can increase viscosity.
Verify that the substrate was free of dust and grease. A non-stick or dirty surface is the most common cause of premature bond failure.
Wipe away excess adhesive immediately using a dry cloth or a solvent-based cleaner suitable for hybrid polymers before it cures.
To ensure success, the surface must be structurally sound, dry, and free from loose particles, oil, or grease. If applying to very dusty surfaces, use a vacuum or a dry brush before application to allow the hybrid polymer to achieve full contact.
Keep the cartridge stored in a cool, dry place. Ensure the nozzle is capped tightly between uses to prevent the adhesive from curing prematurely inside the tip.
