Best current price£48.56from eBay
Shopping.co.uk recommended and popular offers
eBay£48.56Visit shop U-POL Power Can 500ml Black UPOL Aerosol Spray Paint X4 Gloss X4 Satin X4 Matt
Visit shop2 offers from £48.56 - £53.11
View price history by clicking the chart icon.
The U-pol Power Can Aerosol Spray Paint is a professional-grade solution designed for automotive enthusiasts and restoration specialists who require a high-quality finish without the need for a traditional spray gun setup. This 500ml aerosol delivers a consistent, durable black coating that mimics the professional results of compressed air systems, though it requires careful surface preparation and environmental control to avoid common aerosol application pitfalls like runs or uneven texture.
| Colour | Black |
|---|---|
| Model Part Number | PCGMSB/AL-12 |
| Brand | U-pol |
| Container Volume | 500ml |
Yes, for the best adhesion and longevity, especially on bare metal or plastic, applying a compatible primer before the U-pol Power Can is highly recommended.
Yes, it is suitable for automotive interior metal or hard plastic trim, provided the surface is properly prepped and primed.
Allow at least 10-15 minutes of flash-off time between light coats, depending on ambient temperature and humidity.
The U-pol Power Can is designed for general automotive surfaces. It is not specifically rated as a high-heat exhaust or engine block paint.
Plastic surfaces must be treated with a dedicated plastic adhesion promoter before painting to ensure the finish does not flake or peel.
Ensure the can is shaken thoroughly for two minutes. If the issue persists, turn the can upside down and clear the nozzle.
You are applying too much paint at once. Increase your distance from the part or move your hand faster during the spray pass.
The ambient temperature may be too cold or the surface may not have been properly prepared. Ensure you are working in a clean, dust-free environment with moderate humidity.
Proper preparation is the most critical step for success with the U-pol Power Can. Ensure the surface is thoroughly cleaned, degreased, and lightly sanded to promote adhesion. Always shake the can vigorously for at least two minutes before use to ensure the pigment is properly mixed. After use, turn the can upside down and spray for a few seconds to clear the nozzle and prevent clogging. Store in a cool, dry environment away from direct sunlight to maintain the integrity of the paint formula.
