Best current price£46.50from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£46.50Visit shop Design Engineering Heat Shroud - 1/2 - 1 1/4 Inch ID
Visit shop3 offers from £46.50
View price history by clicking the chart icon.
The Design Engineering Heat Shroud is designed for automotive enthusiasts and DIY mechanics who need to protect sensitive wiring and hoses from extreme engine bay heat. Its key benefit is providing effective thermal protection without requiring disassembly of existing components, thanks to its unique wrap-around design with Velcro closure. A potential caveat is that while it offers versatile fitting diameters, users should confirm the specific size for their application to ensure an optimal seal.
| Colour | Silver |
|---|---|
| Series | Heat Shroud |
| Model Part Number | 10405 |
| Brand | Design Engineering |
The Heat Shroud can withstand direct heat up to 250 Degrees C (482 Degrees F).
The aluminum layer reflects radiant heat, effectively lowering the temperature of the air and components surrounding the protected wire or hose. It can reflect radiant heat over 1000 Degrees C (1832 Degrees F).
No, a key feature is its wrap-around design with Velcro closure, allowing for easy installation without needing to disconnect or remove the wire or hose.
It is available in universal sizes for 1/2 inch to 1 1/4 inch ID, and also in specific sizes for -12 AN, -16 AN, and -20 AN hoses.
Yes, its abrasion resistance and high heat protection make it suitable for demanding environments like off-road vehicles, provided the temperature ratings are not exceeded.
While it can be trimmed, be aware that cutting may expose the inner fiberglass material, potentially affecting its durability and heat resistance at the cut edges. Ensure any cut edges are secured to prevent fraying.
For universal sizes, ensure you are not exceeding the maximum recommended diameter. If the hose/wire is smaller than the shroud's minimum, consider using a smaller universal size or shimming if absolutely necessary, though this may reduce effectiveness.
Ensure the Velcro surfaces are clean and free from debris. Realign the Velcro for a secure bond. If the Velcro has worn out, consider replacing the shroud.
This may indicate exposure to temperatures exceeding the specified limits. Ensure the shroud is positioned correctly and is not in direct contact with components that are significantly hotter than the shroud's rating. Replace the shroud if damage is evident.
Setup: To install, simply unfasten the Velcro closure, wrap the Heat Shroud around the wire or hose, and secure the Velcro firmly. For optimal performance, ensure the shroud fits snugly and the overlapping edges create a good seal. For specific AN hose sizes, select the corresponding shroud (-12, -16, or -20 AN) for a precise fit.
Compatibility: This product is compatible with a wide range of wires, cables, and hoses commonly found in automotive applications. It is available in universal sizes suitable for diameters from 1/2 inch to 1 1/4 inch ID, as well as specific sizes for -12, -16, and -20 AN hoses.
Care: Keep the Heat Shroud clean by wiping it with a damp cloth. Avoid using harsh chemicals or abrasive cleaners. Periodically inspect the Velcro closure and the shroud material for any signs of wear, damage, or excessive heat degradation. Ensure the shroud remains properly sealed around the protected component.
