AMSKA INTERNATIONAL Set Of 13 Stair Carpet Rods - Round Finial - Antique Brass
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This set of 13 AMSKA INTERNATIONAL Stair Carpet Rods in Antique Brass is designed for homeowners looking to add a classic touch and secure their carpet runners on stairs. The key benefit is the elegant aesthetic combined with practical functionality, offering a secure grip for carpets up to 70cm wide. A minor caveat is that custom cutting might be required for narrower stair runners, though this is easily managed.
All features
| Model Part Number | 5060833172065 |
|---|---|
| Brand | AMSKA INTERNATIONAL |
Extended Product Information
FAQs
What material are the rods made of?
The rods, brackets, and finials are made from 100% metal.
How wide can the carpet runner be for these rods?
These rods are suitable for carpet runners up to 70 centimeters wide.
Can I shorten the rods myself?
Yes, the rods can be easily cut down to size using a hacksaw or rod cutter. The cuts will be hidden inside the end brackets for a neat finish.
What is included in the set?
Each set includes 13 rods, 26 end brackets (two per rod), 26 finials (two per rod), and matching screws for fitting.
How should I clean the Antique Brass finish?
To maintain the Antique Brass finish, gently wipe with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
What is the diameter of the rod?
The rod has an outer diameter of 10 millimeters.
Can these rods be used with any type of carpet?
They are designed for carpet runners. Ensure the runner is not excessively thick, which might prevent it from fitting securely within the brackets.
Troubleshooting
Rod is too long after cutting
Ensure precise measurements before cutting. If a cut is too short, a new rod piece may be needed, or you can contact the manufacturer for replacement parts.
Screws do not tighten securely
Check if the pilot holes are adequate for the screws. Ensure you are not overtightening, especially if using a power drill. Try using a slightly larger screw if the material is soft.
Finials are loose
Ensure the finials are fully threaded onto the rod. Some finials may have a small set screw; check for this and tighten if present.
Carpet still slips
Ensure the rod is positioned correctly and providing tension. Check that the carpet itself has a non-slip backing or consider adding carpet gripper tape beneath the runner.
Pros and Cons
Pros
- Elegant and timeless Antique Brass finish.
- Sturdy, all-metal construction ensures durability.
- Comes as a complete set with all necessary mounting hardware.
- Customizable length to fit various stair widths.
- Enhances the look and security of carpeted stairs.
Cons
- May require cutting for narrower carpets, adding an extra step.
- Antique Brass finish may require specific cleaning methods to maintain.
- Not suitable for carpets significantly wider than 70cm.
Setup, Compatibility & Care
Setup:
- Determine the width of your carpet runner where the rod will be placed.
- If necessary, cut the metal rod using a hacksaw or rod cutter to the desired length. Ensure the cut is clean.
- Attach one finial to each end of the cut rod.
- Position the end brackets on either side of the carpet runner, ensuring they are aligned.
- Secure the brackets to the stair tread using the provided screws. Use a manual screwdriver or an impact driver on its lowest torque setting to avoid overtightening.
- Place the rod assembly into the secured brackets.
Compatibility:
- Designed for carpet runners up to 70 centimeters wide.
- Suitable for most standard stair treads.
Care:
- Wipe clean with a soft, damp cloth.
- Avoid abrasive cleaners or harsh chemicals that could damage the Antique Brass finish.