Shimano PD-M980 Body Cover and Fixing Bolts - Left Hand
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This replacement body cover and fixing bolt kit is designed for mountain bike enthusiasts and mechanics maintaining the Shimano PD-M980 pedal system. It provides a direct factory-spec solution for refreshing the left-hand pedal body, ensuring smooth operation and structural integrity; however, users should note that this kit is specific only to the left-hand pedal and is not compatible with other pedal models.
All features
| Model Part Number | 46F9806 |
|---|---|
| Brand | Shimano Spares |
Extended Product Information
FAQs
Does this kit fit the right-hand pedal?
No, this specific kit is engineered exclusively for the left-hand pedal.
Is the installation difficult?
It requires basic mechanical knowledge and correct tools. It is recommended to have the Shimano technical manual for the PD-M980 handy.
Does this fix issues with pedal bearings?
No, this is a body cover kit. If you have bearing play, you may need a separate service kit for the axle and bearings.
Why is it labeled as part number 4?
This refers to the position of the part in the official Shimano exploded view diagram for the PD-M980, which helps in identifying parts during service.
Can I use this on PD-M9000 pedals?
No, this kit is specifically designed for the PD-M980 series and may not be compatible with other pedal versions.
Troubleshooting
Difficulty threading the fixing bolts into the new body cover
Ensure that the cover is perfectly aligned with the pedal axle housing and that no debris is inside the threaded holes.
Pedal feels loose after installation
Verify that the fixing bolts have been torqued to the specific manufacturer requirement and that the cover is seated flush against the pedal core.
Pros and Cons
Pros
- Authentic Shimano quality for longevity
- Precise fit for the PD-M980 platform
- Includes all necessary fixing bolts for a complete swap
- Prevents play and potential failure of the pedal body
Cons
- Compatible only with the left-hand pedal
- Not interchangeable with other Shimano pedal models
- Requires specific tools for removal and installation
Setup, Compatibility & Care
To install the body cover, first remove the pedal from the crank arm. You will need to reference the official Shimano exploded view for the PD-M980 to ensure the bearings and axle are properly aligned while the new cover is bolted into place. Always use a torque-calibrated tool to ensure the fixing bolts are tightened to the manufacturer's recommended specification to avoid cracking the new cover. Keep the area clean of debris before installation and periodically check the bolts for tightness after the first few rides to ensure they remain seated.