Draper Hammer Wedges - Pack Of 5
Best current price£7.39from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.39Visit shop B&Q - Hammer Wedges (Pack Of 5) Grey (One Size)
Visit shopB&Q£7.39Visit shop One Offer
1 offer from £7.39
View price history by clicking the chart icon.
Product Information
Full details
The Draper Hammer Wedges (MPN 1183825) are designed for DIY enthusiasts, woodworkers, and maintenance professionals looking to secure loose hammer or axe heads. This kit provides a versatile solution to restore tool safety and performance by effectively tightening heads onto handles, though users should note that these are metal wedges and require proper seating to avoid damaging the handle wood.
All features
| Model Part Number | 1183825 |
|---|---|
| Brand | Draper |
Extended Product Information
FAQs
Can these be used on synthetic handles?
These metal wedges are specifically intended for traditional wooden handles where friction and fiber expansion are used to secure the head.
What does the pack contain exactly?
The pack contains one size 1, one size 3, one size 4, and two size 2 metal wedges.
Do I need any adhesive with these?
While not strictly required, some professionals use a wood glue or epoxy in conjunction with a wedge for a permanent repair.
How do I choose the right size?
Choose the wedge that creates a snug fit in the handle gap without requiring excessive force to start the initial entry.
Are these wedges rust-proof?
They are made of standard metal and should be kept clean and dry; a light coating of oil can prevent rust during long-term storage.
Troubleshooting
Wedge refuses to enter the handle
Ensure the pilot hole is clear of debris or use a slightly smaller wedge size.
Wedge keeps popping out after use
The handle wood may be too dry or compressed; consider soaking the handle end in linseed oil to swell the fibers before re-inserting the wedge.
Pros and Cons
Pros
- Cost-effective solution to repair tools rather than replacing them
- High-quality metal construction ensures long-term hold
- Multiple sizes accommodate different handle eye shapes
- Small footprint in the toolbox
Cons
- Requires manual installation using a hammer
- May cause wood splitting if the incorrect size is forced into the eye
- Metal can potentially rust if stored in damp conditions
Setup, Compatibility & Care
To install, ensure the tool head is seated firmly against the shoulder of the handle before starting. Align the wedge with the grain direction of the handle to minimize the risk of splitting the wood. Always use a secondary 'donor' hammer to drive the wedge deep enough so it sits flush with the top of the head. For maintenance, keep the wedges in a dry environment to prevent corrosion. If you notice a tool head loosening again after several months of heavy use, you may need to seat the wedge deeper or add a secondary smaller wedge.