Bosch Diamond Grinding Head - 125mm x 22.23mm

This grinding head is designed for a high material removal rate on large areas of abrasive materials such as lime-plaster, hard-finish plaster, sandstone, and very abrasive concrete.

It is suitable for concrete, natural stone, and artificial stone, as well as abrasive plasters and sandstone.

No, this grinding head is specifically designed for abrasive mineral-based materials and is not suitable for use on metal or wood.

Bosch's dynamic counter-balancing significantly reduces vibrations. This leads to less user fatigue, improved control, and also protects the power tool from premature wear.

This grinding head has a 22.23 mm bore size, which is a standard fitting for many angle grinders, but it is optimized for Bosch concrete grinders.

The grinding head should be replaced when the diamond segments show significant wear or damage. Regular inspection is recommended.

Yes, always wear appropriate personal protective equipment (PPE), including safety glasses, a dust mask, gloves, and hearing protection, due to the dust generated.

Ensure the grinding head is correctly and securely mounted. Check for any damage to the grinding head segments or the grinder's spindle. Ensure the grinder's dynamic counter-balancing is functioning correctly.

Verify you are using the correct grinding head for the material. Check if the diamond segments are worn down. Ensure the grinder's speed is appropriate for the material and application. Clear any accumulated dust from the grinding head's surface.

Reduce the pressure applied during grinding. Ensure adequate dust extraction to prevent clogging. Take breaks to allow the tool and accessory to cool down. Do not force the tool.