Setup: 1. Foundation: Before assembly, ensure you have a level and solid foundation (e.g., concrete slab, paved area, or treated timber base) slightly larger than the shed's footprint (330cm W x 260cm D). 2. Unpacking: Carefully unpack all boxes and lay out components, referring to the included instruction manual. Note that packages may arrive on separate days. 3. Assembly: Follow the step-by-step instructions provided. Assembly typically requires at least two people due to the size and weight of steel panels. A cordless drill, gloves, and safety glasses are recommended. 4. Anchoring: Once assembled, firmly anchor the shed to your foundation to prevent wind damage. Anchoring hardware is usually not included. Compatibility: This shed is designed to accommodate a wide range of garden and outdoor equipment, including: - Lawnmowers, trimmers, leaf blowers - Garden furniture and cushions - Bicycles and sports equipment - Firewood and logs in the dedicated store - Gardening tools and supplies - Small workshop equipment Care: 1. Cleaning: Periodically clean the exterior with mild soap and water using a soft cloth or sponge. Avoid abrasive cleaners or scouring pads that could damage the finish. 2. Maintenance: Inspect hinges, screws, and panels annually. Tighten any loose fasteners. 3. Ventilation: Ensure the four ventilation shutters remain unobstructed to maintain proper airflow. 4. Rust Prevention: While galvanized, promptly address any scratches or chips in the paint finish with a suitable metal primer and paint to prevent rust formation.