Plumbright Compression Stop End - 10mm
Best current price£2.56from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£2.56Visit shop Plumbright Compression Stop End 10Mm P923.2. 954351
Visit shopCity Plumbing GB£2.56Visit shop One Offer
1 offer from £2.56
View price history by clicking the chart icon.
City Plumbing GBPlumbright Compression Stop End 10Mm P923.2. 954351
Free delivery in 1–3 days
£2.56
Visit shop
Product Information
Full details
This guide is for plumbers and DIY enthusiasts needing to cap off a 10mm pipe securely. The Plumbright Compression Stop End offers a reliable and straightforward method for isolating a pipe section in central heating and hot & cold water systems. While it provides a robust seal, improper installation can lead to leaks.
All features
| Model Part Number | P923.2 |
|---|---|
| Brand | Plumbright |
Extended Product Information
FAQs
What type of pipe can I use this fitting with?
This fitting is primarily designed for 10mm copper pipe and is generally compatible with many 10mm plastic pipe systems. Always confirm compatibility with your specific pipe type.
Do I need any special tools to install this?
You will need two wrenches to tighten the compression nut securely. A pipe cutter and deburring tool may also be useful for preparing the pipe end.
Can this fitting be removed and reused?
No, compression fittings, including stop ends, are designed for a permanent installation. The olive deforms onto the pipe during tightening, making removal without damaging the pipe or fitting difficult.
What pressure can this fitting withstand?
This fitting is suitable for standard domestic central heating and hot & cold water pressures. For high-pressure systems, consult a qualified plumber.
Is this fitting suitable for gas lines?
No, this fitting is specifically designed for water systems and is not certified or suitable for gas installations.
How tight should I make the compression nut?
Tighten the nut until it is snug, then typically an additional half to three-quarters of a turn. Avoid over-tightening, which can damage the fitting or pipe.
Troubleshooting
Leak at the compression nut
Ensure the pipe end is clean, square, and fully inserted. Check that the olive is correctly positioned. Attempt to tighten the compression nut slightly more. If the leak persists, the fitting may need to be replaced.
Fitting won't tighten properly
Verify you are using the correct size fitting for 10mm pipe. Check for any damage to the threads on the nut or fitting body. Ensure the pipe is not deformed.
Pipe is difficult to insert fully
Ensure the pipe end is not deformed or crushed. Use a pipe reamer or deburring tool to clean the inside edge of the pipe if necessary.
Pros and Cons
Pros
- Provides a reliable and permanent seal.
- Durable construction ensures long-term performance.
- Simple to install with minimal tools.
- Versatile for various water systems.
- Cost-effective solution for pipe termination.
Cons
- Requires a clean pipe end for proper sealing.
- Cannot be easily removed or reused once fitted.
- Over-tightening can damage the fitting or pipe.
- Not suitable for high-pressure or non-potable applications without verification.
Setup, Compatibility & Care
Setup:
- Ensure the end of the 10mm pipe is cut square and free from burrs or debris.
- Slide the compression nut onto the pipe, followed by the olive (if not pre-attached).
- Push the pipe firmly into the stop end fitting, ensuring it is fully seated.
- Tighten the compression nut using two wrenches: one to hold the fitting body and the other to turn the nut. Tighten firmly until the nut is snug, then an additional 1/2 to 3/4 turn is typically sufficient. Avoid over-tightening.
Compatibility:
- This fitting is designed for use with 10mm nominal bore copper pipe conforming to relevant standards.
- It is also compatible with certain types of 10mm plastic pipe systems, but compatibility should always be verified with the pipe manufacturer.
- Suitable for use in central heating systems and potable hot and cold water supplies.
Care:
- This is a permanent fitting and does not require ongoing care. Ensure it is installed correctly to prevent future issues.