Hyco Microboil Wall Mounted Smart Technology Boiling Water Heater - 3L - White - MS3W

The Microboil Smart provides instant boiling water for preparing hot drinks in the workplace. It h...

Best current price£720.00from Bradfords

All Offers

2 offers from £720.00 - £786.24

View price history by clicking the chart icon.

BradfordsHyco Microboil Smart Boiling Water Heater 3L White, Wall Mounted Office Dispenser for 18 Cups
£25.00 delivery
£720.00
Visit shop
City Plumbing GBHyco White Microboil Smart Wall Mounted Boiling Water Heater, 3 Litre, Ms3w
Free delivery in 1–3 days
£786.24
Visit shop

Product Information

Full details

The Hyco Microboil MS3W is designed for workplaces needing instant boiling water, offering significant energy efficiency improvements over standard models. It learns user habits to optimize power usage, reducing standing losses by up to 50%. While its smart technology enhances efficiency, initial setup requires understanding its learning algorithms for peak performance.

All features

Model Part NumberMS3W
BrandHyco

Extended Product Information

FAQs

How does the smart technology work?

Sophisticated electronic algorithms monitor your usage patterns and predict when boiling water is most likely needed. The unit heats up in advance for these times and reduces power consumption during periods of inactivity, significantly improving energy efficiency.

What is the warranty period?

The standard warranty includes 1 year on-site for the complete unit and 2 years parts or replacement on electronic components. A 3-year on-site warranty is available at an additional cost.

Is this unit suitable for a small office with only 5 employees?

Yes, while designed for busy commercial premises, the energy-saving features and predictive heating make it efficient even for smaller groups. The smart technology will adapt to lower usage patterns.

How often should the unit be descaled?

The frequency of descaling depends on the hardness of your local water supply. It's recommended to check the manufacturer's guidelines or consult a service technician. Typically, it might be required annually or bi-annually in hard water areas.

Can I adjust the temperature setting?

The Hyco Microboil Smart is designed to provide boiling water at approximately 96-98°C. Specific temperature adjustments are typically managed by the internal electronics and algorithms.

What is the standing loss reduction?

The MS3W model offers up to a 50% cut in standing losses compared to standard Microboil models. For the 3L model, standing losses are as low as 23W with the smart feature active.

Troubleshooting

Unit not dispensing hot water

Check the power supply to the unit. Ensure the water supply is turned on and the tank is full. Verify that the tap is functioning correctly and not blocked.

Water not reaching boiling point

Confirm the unit is switched on and has had sufficient time to heat. Check for any error codes displayed on the unit. Ensure the smart technology is not in a deep power-saving mode that delays heating excessively; allow it time to learn.

Leaking from unit or tap

Turn off the water supply to the unit immediately. Inspect for loose connections or damaged seals. Contact a qualified technician for repair.

Low flow rate

Check if the water inlet filter is clogged. Ensure the tap mechanism is clean and free from debris. The water supply pressure might be low.

Unit making unusual noises

Some operational noises like heating or water filling are normal. Persistent loud or unusual noises could indicate an internal issue; consult the manual or a service technician.

Pros and Cons

Pros

  • Significant energy savings due to smart technology
  • Reduced standing losses compared to older models
  • High flow rate suitable for commercial settings
  • Maintains water purity
  • Durable construction for heavy use
  • Predictive power usage optimizes efficiency

Cons

  • Smart technology requires an initial learning period
  • Warranty requires understanding of parts vs. on-site coverage
  • Installation might require professional assistance
  • Maximum capacity is 3L
  • Not suitable for domestic use

Setup, Compatibility & Care

Setup: Installation of the Hyco Microboil MS3W typically requires a qualified plumber and electrician. The unit should be wall-mounted securely and connected to a suitable water supply and electrical outlet. Ensure adequate ventilation around the unit. The smart technology may require an initial period to learn usage patterns for optimal efficiency.

Compatibility: The MS3W is designed for standard UK water supplies. Ensure your electrical circuit can support the unit's power requirements. It is intended for commercial or workplace use.

Care: To maintain performance and water purity:

  1. Regular Cleaning: Wipe the exterior with a damp cloth. Avoid abrasive cleaners.
  2. Descaling: Depending on water hardness, periodic descaling may be necessary. Consult the manufacturer's full manual for specific descaling procedures and recommended solutions.
  3. Tap Maintenance: Periodically check the tap for wear and ensure it operates smoothly. Heavy-duty replacement taps are available.
  4. Filter Check: If applicable to your installation, ensure any inline filters are checked and replaced as per their schedule.

Similar items

Price History

DatePrice
Visit shop