Stair Cladding Set - Oak Tread and Riser - 1500 x 235mm - Blueprint Joinery
Transform your existing staircase with minimal disruption by covering your existing steps with Oak...Transform your existing staircase with minimal disruption by covering your existing steps with Oak Tread and Riser Cladding sets. Supplied in raw timber ready for you to choose the finish to match your home. This set allows you to transform your existing stairs into a modern oak staircase. This set makes it easy to clad your current steps, giving them a beautiful oak appearance. Simply cut the tread and riser to size and stick them onto your existing steps for an instant upgrade. The set includes one tread and one riser, each measuring 1500mm wide. The tread measures 1500 x 270 x 22mm and the riser measures 1500 x 230 x 9mm. This set comes ready for you to apply your chosen finish, ensuring a seamless and personalised look for your staircase.
This guide helps homeowners easily upgrade their staircases using the Blueprint Joinery Oak Tread and Riser Cladding sets. Designed for straightforward installation, this set allows you to cover existing steps with beautiful oak, transforming your staircase with minimal effort. Please note that accurate measurements and basic cutting skills are required for a perfect fit.
All features
Brand
Blueprint Joinery
Extended Product Information
FAQs
What tools do I need?
You'll need a measuring tape, saw (circular or hand saw), construction adhesive, clamps, sandpaper, and tools for applying your chosen finish (brush, rag, etc.).
Can I use this on a curved staircase?
These sets are designed for straight staircases. They may not be suitable for curved stairs unless you are skilled at custom fitting.
What type of finish should I use?
You can use stain, varnish, paint, or any other finish suitable for wood. Choose a finish that complements your home decor and provides the desired level of protection.
How do I measure the steps?
Measure the width, depth (for the tread), and height (for the riser) of each step accurately. It's best to measure each step individually as sizes may vary.
How long does the installation take?
Installation time varies depending on the number of steps and your experience. Allow several hours for measuring, cutting, adhering, and finishing. Allow additional time for the adhesive to cure and the finish to dry.
Can I install this myself?
Yes, this is designed for DIY installation, assuming you have basic carpentry skills. If you're unsure, consider professional installation.
What if the tread and riser are slightly too large?
It's better to have them slightly larger so you can trim them to fit. Use a saw to trim the pieces to the correct size.
How do I care for the finished oak?
Clean regularly with a damp cloth. Avoid harsh chemicals or abrasive cleaners. Protect the finish with a suitable wood polish or sealant as needed.
Troubleshooting
Tread or riser doesn't fit correctly.
Double-check measurements and recut if necessary. Ensure the existing step surface is clean and level before application.
Adhesive isn't holding the pieces in place.
Ensure you're using a construction adhesive appropriate for wood. Apply sufficient adhesive and clamp the pieces securely until the adhesive cures.
Finish is uneven or not adhering properly.
Ensure the surface is properly prepared (sanded and cleaned) before applying the finish. Apply thin, even coats and allow each coat to dry completely.
Pros and Cons
Pros
Easy to install, ideal for DIY projects.
Provides a significant aesthetic upgrade to your staircase.
Offers a customizable finish to match your home decor.
Cost-effective way to refresh your stairs without a full replacement.
Made from durable oak for long-lasting use.
Cons
Requires accurate measurements and cutting.
The finish needs to be applied separately.
May require additional tools like a saw and adhesive.
Suitable only for covering existing stairs, not for new builds.
Setup, Compatibility & Care
Setup:
Measure: Accurately measure the width, depth, and height of your existing steps.
Cut: Use a saw to cut the oak tread and riser to the required dimensions.
Adhere: Apply construction adhesive to the back of the tread and riser.
Position: Carefully align and press the tread and riser onto your existing step.
Secure: Use clamps or weights to hold the pieces in place until the adhesive sets.
Finish: Once the adhesive is dry, apply your chosen finish (stain, varnish, or paint).
Compatibility:
Suitable for most existing staircases with flat, stable steps.
Ensure the existing steps are structurally sound before installation.
Care:
Clean with a damp cloth.
Avoid harsh chemicals or abrasive cleaners.
Regularly inspect for wear and tear, especially in high-traffic areas.
Homebase£108.00Visit shop 
wilko£108.00Visit shop 
B&Q£115.00Visit shop 
