Best current price£14.65from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£14.65Visit shop Timco A3023-200 Reciprocating Saw Blades - Wood Cutting - High Carbon Steel S2345x Pack 5
Visit shop
B&Q£17.25Visit shop B&Q - Reciprocating Saw Blades Wood Cutting High Carbon SteelS2345X
Visit shop2 offers from £14.65 - £17.25
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals needing to make fast, clean, and effortless straight cuts in wood, plastics, and composite boards. The Timco S2345X reciprocating saw blade offers high strength and low heat generation, making it ideal for materials like construction lumber, plywood, MDF, and chipboard, though it is not optimized for metal. Key features include its high carbon steel construction and a TPI range suitable for various wood thicknesses.
| Model Part Number | S2345X |
|---|---|
| Brand | Timco |
This blade is ideal for cutting construction wood, boards, chipboard, MDF, plywood, and plastic. It is not designed for metal.
The blade has a cutting capacity of up to 150.0mm in thickness.
No, this blade is specifically designed for wood and plastic and is not suitable for cutting metal.
The TPI range of 6-10 indicates the number of teeth per inch. A lower TPI (like 6) cuts faster but leaves a rougher finish, while a higher TPI (like 10) cuts slower but provides a smoother finish. This range offers versatility for different wood types and desired results.
The SSS design means the teeth are angled outwards (side set) and are sharpened, which allows for a wider kerf (cut width) to prevent binding and ensures a sharper edge for faster, cleaner penetration into the material.
This Timco blade is equivalent to the Bosch S2345X model.
Check if the blade is the correct type for the material. Ensure the teeth are not dull or damaged. Verify that the blade is securely locked in the saw's clamp.
Ensure you are making a straight cut and not twisting the blade. Check if the material is too thick for the blade's capacity or if there are hidden obstructions. Apply consistent, moderate pressure.
Make sure the blade is properly seated in the saw's clamp. Reduce the saw's speed setting if applicable. Ensure the material being cut is securely supported.
Setup: Ensure the reciprocating saw is unplugged before attaching or removing the blade. Insert the blade shank firmly into the saw's blade clamp until it clicks or locks into place. Refer to your specific saw's manual for detailed instructions on blade insertion.
Compatibility: This blade is compatible with all standard reciprocating saws that accept a universal shank blade. It is equivalent to the Bosch S2345X model.
Care: After each use, remove the blade from the saw and clean off any sawdust or debris using a dry or slightly damp cloth. Avoid using solvents or harsh chemicals. Store the blade in a dry place to prevent rust. Inspect the blade for any signs of damage, such as bent teeth or cracks, before and after each use. Replace the blade if it shows significant wear or damage to ensure optimal performance and safety.
