Mylek Over Door Fan Heater - 2KW

Its primary purpose is to create a barrier of warm air above an entrance to prevent cold drafts from entering and to reduce heat loss from the room.

While effective for doorways, it's best suited for standard-sized entrances. For very large or high-traffic areas, it might serve as a supplementary heat source rather than the primary one.

Yes, the remote control typically requires batteries (usually AAA or similar) which are not always included. Please check the product manual for specifics.

The heater features a PTC heating element for efficient heat generation and is ERP compliant, meaning it meets European standards for energy efficiency.

Due to its wall-mounted nature and electrical requirements, professional installation is strongly recommended for safety and proper functionality.

Basic maintenance includes dusting the exterior and ensuring air vents are clear of debris. Always disconnect power before cleaning and refer to the manual for detailed instructions.

The heater has a heating power of 2KW.

Ensure the unit is properly connected to the power supply and that the circuit breaker has not tripped. Check if the remote control has working batteries and is within range.

Verify that the heat setting is selected and the thermostat is set to a temperature above the ambient room temperature. Check for any blockages in the air vents.

Check and replace the batteries in the remote control. Ensure there are no obstructions between the remote and the heater's sensor. Try moving closer to the unit.

Turn off the unit and check the fan vents for any debris that might be interfering with the fan blades. If the noise persists, contact customer support.