D-C-Fix Self-Adhesive Vinyl Film - Whitewood - 67.5cm x 3m

D-C-Fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces aroun...

Best current price£19.97from B&Q

One Offer

1 offer from £19.97

View price history by clicking the chart icon.

B&QB&Q - Whitewood 67.5Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£19.97
Visit shop

Product Information

Full details

The D-C-Fix Self-Adhesive Vinyl Film in Whitewood is perfect for DIY enthusiasts and renters looking to refresh kitchen worktops, furniture, and other flat surfaces affordably and without permanent changes. Its key benefit is an easy, budget-friendly update with a realistic woodgrain effect. A minor caveat is the need for careful application and sealing around wet areas to ensure longevity.

All features

Model Part Number200-8078-3
Brandd-c-fix

Extended Product Information

FAQs

Is this product suitable for outdoor use?

No, the D-C-Fix vinyl film is designed for interior use and is not rated for outdoor weather conditions.

How long does the adhesive last?

With proper application and care, the adhesive is designed for long-term adhesion. The product has a 1-year guarantee.

Can I apply this over existing wallpaper?

It's best to apply to smooth, flat surfaces. Applying over wallpaper may result in an uneven finish and potential issues with adhesion and removal.

What is the best tool for smoothing out bubbles?

A felt-edge smoother or a squeegee is recommended for pushing out air bubbles and ensuring a smooth finish.

Can I remove the vinyl after a long period?

Yes, the vinyl is designed to be removable. Applying heat from a hairdryer on a low setting can help soften the adhesive for easier removal.

What is the difference between this and a countertop replacement?

This vinyl film is a surface covering that adheres to your existing countertop, offering a cosmetic update at a much lower cost and effort than replacing the entire countertop.

Is the material safe for food preparation areas?

The material is phthalate-free. However, it's recommended to use cutting boards for food preparation and avoid direct contact with hot pans to maintain the surface integrity.

Troubleshooting

Air bubbles or creases after application

Gently lift the vinyl back to the point of the bubble or crease and re-apply, using a smoother tool to press out air. A hairdryer on a low setting can help to reposition. For small bubbles, a pinprick can allow air to escape.

Vinyl not sticking properly

Ensure the surface was thoroughly cleaned and dried before application. Re-apply gentle heat with a hairdryer to reactivate the adhesive, then press firmly.

Difficulty applying around corners or curves

Use a hairdryer on a low setting to gently warm and stretch the vinyl, making it more pliable to conform to the shape. Work slowly and smoothly.

Lifting at edges, especially near water

This indicates a potential breach in the sealant. Ensure edges are properly sealed with silicone sealant. If already lifting, carefully remove the affected section, clean the area, and re-apply, ensuring a good seal.

Pros and Cons

Pros

  • Budget-friendly alternative to full surface replacement.
  • Ideal for renters due to its removable nature.
  • Easy to apply and reposition, minimizing errors.
  • Wipe-clean surface for simple maintenance.
  • Realistic aesthetic to update decor.

Cons

  • Not suitable for hot pans; worktop savers are recommended.
  • Requires sealing around sinks and hobs to prevent water damage.
  • Durability can be affected by harsh chemicals or prolonged exposure to moisture.
  • May require patience and practice for a flawless finish on complex surfaces.

Setup, Compatibility & Care

Setup:

  1. Ensure the surface is clean, dry, and smooth.
  2. Measure and cut the vinyl using the grid on the reverse, allowing a slight overlap for trimming.
  3. Peel back a small section of the backing paper.
  4. Carefully position the vinyl and slowly smooth it down using a felt edge smoother, working from the center outwards to remove air bubbles.
  5. For curved edges, gently heat the film with a hairdryer on a low setting to make it more pliable.
  6. Trim any excess material with a utility cutter.
  7. Seal edges around sinks and hobs with silicone sealant.

Compatibility:

This vinyl can be applied to any flat, non-porous surface including wood, laminate, metal, and glass. It is not recommended for textured, excessively uneven, or freshly painted surfaces.

Care:

  • Wipe clean with a damp cloth and mild detergent.
  • Wipe up spills immediately to prevent staining.
  • Avoid abrasive cleaners or scrubbing pads.
  • Do not place hot pans directly on the surface; use trivets or pan stands.
  • Heat resistance is up to 70°C.

Price History

DatePrice
Visit shop