Best current price£206.40from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£206.40Visit shop Hyco 15L Unvented Water Heater 1.2kW Steel Tank for Kitchen and Office
Visit shop1 offer from £206.40
View price history by clicking the chart icon.
The Hyco Speedflow SF15K12 is a 15-litre unvented undersink water heater designed for individuals and businesses needing instant hot water in areas without a central hot water supply, such as cloakrooms, small kitchens, or office washrooms. Its primary benefit is providing reliable mains-pressure hot water via a compact 1.2kW unit, though users should note that the 15-litre capacity is best suited for light use cases like handwashing or quick dishwashing rather than heavy-duty requirements.
| Model Part Number | SF15K12 |
|---|---|
| Brand | Hyco |
Yes, it is designed to work with standard taps and mixer taps, provided the system pressure is within the specified 0.5 to 4.2 bar range.
The unit is rated at 1.2kW, which is relatively low, but it should be installed in accordance with local electrical regulations; consult a professional electrician regarding your specific installation needs.
Heat-up time depends on the incoming water temperature and the desired output temperature, but as a 1.2kW unit, it is designed for continuous recovery rather than rapid heat-up.
The Hyco Speedflow SF15K12 is an unvented water heater, meaning it operates at mains pressure.
Keep the area around the unit clean and dry, periodically check connections for signs of leaks, and ensure the thermostat is set correctly for your needs.
It can be installed in outbuildings, provided the area is protected from extreme conditions and the unit is not subjected to freezing temperatures (though it does include frost protection).
Check that the electrical power supply is active and the unit is switched on. Verify the thermostat is set to an appropriate temperature.
Ensure the water supply valves are fully open and check that the inlet pipe is not kinked or blocked. Verify that the incoming mains pressure meets the 0.5 bar minimum.
Unvented units may discharge small amounts of water during the heating process due to thermal expansion. If dripping is continuous, consult a qualified plumber.
Installation of the SF15K12 should be carried out by a competent person familiar with plumbing and electrical safety standards. Ensure the unit is installed in an upright position in an area where the weight can be supported when full.
