Trend Circular Saw Blade - 165mm x 24T x 20mm

The Trend CSB/16524T is suitable for hard and softwoods, and sheet materials such as plywood and MDF.

The kerf is 1.5mm.

The bore size is 20mm.

This blade is designed for 165mm blades. Check your saw's manual or specifications to confirm compatibility.

Store the blade in a dry place to prevent rust. Consider using a blade protector or case.

While it provides a good finish, this blade is optimized for a balance between speed and finish. For very fine work, consider a blade specifically designed for that purpose.

Blade life depends on usage and the materials cut. Inspect the blade regularly for dullness or damage and replace it when necessary.

Replacement blades can be found at most hardware stores or online retailers that sell woodworking tools and accessories.

Check if the blade is installed correctly, with the teeth facing the correct direction. Make sure the blade is clean and free of resin buildup. Ensure that the blade is sharp; if not, replace it.

Check the blade's condition; a dull blade can cause this. Adjust the cutting speed or feed rate. Use a blade designed specifically for finer cuts if the material requires it.

Ensure the blade is aligned with the material. Reduce the feed rate, especially when cutting thicker materials. Check the saw's motor; if it's struggling, it may need servicing.