Best current price£3.99from The Range
Shopping.co.uk recommended and popular offers
The Range£3.99Visit shop Primaplumb 50 X 40Mm Reducers Grey - Primpwr4050g - Perfect For Pipe Size Transition - Grey
Visit shop2 offers from £3.99 - £4.55
View price history by clicking the chart icon.
The Primaplumb 50 x 40mm Reducer is designed for professional plumbers and DIY enthusiasts needing to transition between 50mm and 40mm pipe diameters in residential or commercial drainage systems. Its primary benefit is providing a robust, leak-resistant connection that maintains system efficiency; however, users should verify local plumbing codes regarding pipe material compatibility before installation to ensure the fitting is appropriate for the specific application.
| Model Part Number | PRIMPWR4050G |
|---|---|
| Brand | Primaplumb |
No, this reducer is designed for gravity-fed drainage systems and is not rated for high-pressure water supply applications.
It is intended for standard plumbing pipes used in drainage and waste water systems, typically PVC or ABS.
Standard pipe cutting tools and appropriate solvent welding cement are usually sufficient for installation.
Yes, provided the installation is protected from direct, prolonged UV exposure or extreme physical impact.
Once solvent welded, the fitting becomes a permanent part of the pipe assembly and cannot be safely reused.
Ensure the pipe has been fully seated into the reducer housing; if using solvent weld, confirm adequate coverage on all bonding surfaces.
Verify that the pipe ends were cleaned of dust and oils before installation and that the correct adhesive for the pipe material was applied.
To install the reducer, ensure the pipe ends are deburred and free of debris for a smooth fit. Apply the appropriate solvent cement or lubricant recommended for your specific pipe material before sliding the reducer into position. The component is compatible with standard PVC and ABS drainage pipes of the indicated diameters. For maintenance, periodically check the joints during routine plumbing inspections to ensure no movement or seal degradation has occurred. Avoid using abrasive tools or harsh chemicals that could compromise the integrity of the plastic molding.
