Stelrad Softline Silhouette K2 Steel Panel Radiator - White - 600 x 400mm

This radiator is designed for wet central heating systems and is fully compatible with low-temperature systems, including those using condensing boilers, heat pumps, and solar thermal systems.

Clean the radiator with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals. For dust, use a soft brush or vacuum cleaner attachment.

The Stelrad Softline Silhouette radiator comes with a 15-year warranty from the manufacturer.

'K2' refers to the radiator type: a double panel with two radiators and two convector fins. This configuration provides a higher heat output compared to single-panel radiators.

While technically possible, it is recommended to have this radiator installed by a qualified heating engineer to ensure proper connection to your central heating system and to comply with safety standards.

The dimensions of this specific model are 600mm in height and 400mm in width.

The radiator is finished in White (RAL9016).

Check that the central heating system is on and that the thermostat is set correctly. Bleed the radiator to release any trapped air. Ensure the thermostatic radiator valve (TRV) or manual lockshield valve is open.

Hissing or gurgling sounds often indicate air in the system, which can be resolved by bleeding the radiator. Banging noises could suggest water hammer or expansion issues, which may require professional inspection.

If leaking from a valve, try gently tightening the valve head. If the leak persists or is from a pipe connection, turn off the water supply to the radiator and contact a qualified heating engineer for repair.

Often caused by air or sludge buildup. Bleeding the radiator can help. If the issue is at the bottom, it might indicate sludge, and a system flush may be required by a professional.