Stronglight Dural 5083 Outer Chainring - 52T - 130mm - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for cyclists using Shimano 9 and 10-speed drivetrains looking to upgrade their chainring. The Stronglight Dural 5083 provides a durable and efficient 52-tooth chainring for improved performance. Note that this chainring is only compatible with Shimano chainsets featuring a 5-bolt 130mm fitting.
All features
| Model Part Number | Dural 5083 |
|---|---|
| Brand | Stronglight |
Extended Product Information
FAQs
What tools do I need to install this chainring?
You will need a chainring bolt wrench and possibly a crank puller, depending on your crankset.
Is this chainring compatible with 11-speed drivetrains?
No, this chainring is only compatible with Shimano 9 and 10-speed drivetrains.
What is the BCD of this chainring?
The BCD (Bolt Circle Diameter) is 130mm.
What material is the chainring made of?
It is made of machined 5083 Alloy.
How do I clean the chainring?
Use a degreaser and a brush to remove dirt and grime. Rinse with water and dry thoroughly.
What is the tooth count of this chainring?
It has 52 teeth.
What if the chainring does not fit?
Make sure that your crankset has a 5-bolt 130mm fitting before attempting to install. Contact customer support for further assistance.
Troubleshooting
Chain skipping or not shifting smoothly.
Check the front derailleur alignment and adjust the cable tension. Inspect the chainring teeth for damage or wear.
Chainring bolts coming loose.
Ensure bolts are tightened to the correct torque specification. Use a thread locker if necessary.
Chain rubbing on the chainring.
Adjust the front derailleur position to eliminate rubbing.
Pros and Cons
Pros
- Improved shifting performance compared to worn chainrings.
- Durable 5083 Alloy construction provides longevity.
- Precise tooth profile for reliable chain engagement.
- Compatible with a wide range of Shimano drivetrains.
Cons
- Only compatible with Shimano 9 and 10-speed drivetrains.
- Requires a compatible crankset with a 5-bolt 130mm fitting.
- Installation requires specific tools.
- May require chain length adjustment.
Setup, Compatibility & Care
Setup:
- Remove the old chainring from your crankset.
- Align the Stronglight Dural 5083 chainring with the 5-bolt pattern on your crankset.
- Securely tighten the bolts to the manufacturer's recommended torque.
- Check chain alignment and adjust the front derailleur as needed.
- Test the shifting performance to ensure proper function.
Compatibility:
- Compatible with Shimano 9 and 10-speed drivetrains.
- Must be used with a crankset featuring a 5-bolt 130mm fitting.
Care:
- Regularly clean the chainring with a degreaser and a brush.
- Inspect for wear and tear, especially the teeth.
- Replace the chainring when teeth show significant wear.