Soho Lighting Brushed Brass Dimmer and Rocker Switch Combo - Gold

The dimmer supports a maximum of 150W for dimmable LED bulbs.

No, this dimmer is designed exclusively for use with dimmable LED, Halogen, or Incandescent bulbs.

You can switch between leading and trailing edge modes via a simple button setup on the dimmer module itself. Refer to the product manual for specific instructions.

For multi-location switching with the 2-way dimmer, you will need standard 2-way switches, which are provided separately.

Use a soft, dry cloth. For tougher marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners.

The dimmer includes short circuit protection, overload protection, and a self-recovering thermal fuse.

Information regarding warranty period is not provided in the product description.

Check that the power is on at the consumer unit. Verify all wiring connections are secure and correct according to the manual. Ensure the bulb is dimmable and within the wattage limit.

Ensure you are using dimmable bulbs. Try switching the dimming mode (leading/trailing edge) via the button on the dimmer module. Check if the total bulb wattage is within the recommended range.

Verify wiring connections for the rocker switch part of the combo. Ensure the circuit has power.

Confirm that standard 2-way switches are used at all other control points. Double-check the wiring configuration for the 2-way circuit as per the installation guide.